Search results

also can i clarify having explained our setup that i deffo need a positive head pump? thanks

thanks for your patience!! so the link you've given will work with our setup - and i'm assuming that pump produced 1 bar output pressure? - would the cold pressure (mains) need to be reduced to 1 bar also? as i read somewhere to mix a warm water temp it is roughtly 2 lots cold to 1 lot of hot...

Hi Tim, thanks for your reply. what do you mean by a small brass ended pump? also not sure i understand what you mean about it being regenerative - sorry for being thick!! I am pretty sure the pipe running from floor to ceiling suppling the flats is 28mm at least. The temperature...

Hi Tim, as i understood it the pump could be sited in the flat as even though the boilers are in the basement the cold water supply tank is in the roof space, which supplies the 'push' for the gravity fed system? I would not be able to have an independent feed - does this mean a pump would...

bump

bump

Hi Guys, am looking to install a single pump on the hot supply in our bathroom for a shower. want to check it wont cause any problems. we live in a low-rise block of flats, ground, first and second floors. The hot water system is gravity fed - we have a huge cold water tank in the...

Hi soon to be tiling our bathroom in a large quanity of fired earth's retro metro crackle glazed tiles - http://www.firedearthshop.com/epages/FEShop.sf/en_GB/?ObjectPath=/Shops/FEShop/Categories/Browse_Catalogue/Wall_Tiles/Kilns_of_the_World/Retro_Metro&PageSize=200 fired earth...

bugger

really don't like the look of it though - are there any other options?

what the horrible corner trim stuff?

thanks for the info - what options do i have then?

Hi Guys, am going to be tiling the bathroom with fired earth's crackle glazed retro metro range of tiles - see here - http://www.firedearthshop.com/epages/FEShop.sf/en_GB/?ObjectPath=/Shops/FEShop/Categories/Browse_Catalogue/Wall_Tiles/Kilns_of_the_World/Retro_Metro&PageSize=200 and on...

no-one?

AM looking at the pumped version but have not been able to get out of aqualisa what the max difference can be between the hot and cold inputs, when I was looking a a grohe version I kn ow that they said a max difference of 5:1 between hot and cold, but can't find any details out about the...

am looking at a stewart turner monsoon 3bar single positive pump for my gravity hot water - yet in the details it states... Note: These pumps should not be used for: * Supply of hot and cold water services to a common mixer. * Supply of pumped hot water service to a common mixer...

Anyone fitted the aqualisa mentioned above with different hot and cold pressures? thanks Nick

just to update - have spoken to aqualisa and they've given me the same min and max input pressures as grohe did - between 0.1 and 1 bar. but they couldn't give me a maximum differential between the hot and cold inputs as they said on a gravity fed system they'd always be equal - obviously in...

hi serco, thanks for the link - v. reassuring!! have deceided not to go ahead with the grohe wireless as it wouldn't suit the decor of our small bathroom. Am I right in assuming that I can expect the same performance etc from aqualisa's axis digital pumped shower? this is now what i'm...

Hi All, forgive me for being stupid but would like a definitive, knowledgeable answer... currently we have a mixer tap suppling a shower handset, this has a low-pressure headset on it and provides a good shower, nothing to set the world alight regarding pressure etc. I've purchased a...