Search results

Hi All, We have a town house with the lounge on the 1st floor. We have decided on putting bamboo flooring on the ground and 1st floor. The stairs lead directly into the lounge. One of the things we can't visualise/agree on/do for the best effect on these stairs and wondered what you guys...

I have also used these on customers machine to great effect! ComboFix SDFix Super Anti Spyware Malwarebytes Ad-Aware Spybot Always backup before scanning though - just incase the above happens. We just Ghost and then extract the data if everything goes toes up

I second Avast also

Need to confirm that is what was replaced by the computer shop a few months ago. It could just be a general fault on the PSU - internal fuse, for example. Also the Wattage main be too low depending on the amount of other hardware in the PC. If the PSU was replaced, I would hope the guy...

You should be able to access her files from c:\users\[username]. I would just create a new account and copy the files over from the old to new profile.

Hmm - that answers that then. Basically the reason why we wanted the flexi hose was to be able to disconnect ourselves (and move the unit with the hob and oven out) ready for the plasterer to come in and do his bit But as you say, if we have to use a gas fitter to commision the connection...

Hi Having a new kitchen fitted soon, and getting my uncle in to do most of the fitting, but will be getting a gas fitter in to re-route the gas pipe to the hob. Currently the pipe is 'hard-connected' into the hob. In my previous house I remember having a bayonet connector with a rubber...

We got the 10mm Tredaire Zest, from here: http://tradepriced.co.uk/tredaireapt_carpet_underlay.html What at the door the next day!. Good sound proofing, but we got a thick carpet also. Just be warned about the height of the doors above the floor as we had to take a couple up!

If we were going to spend £50psqm that would be £2500 for our lounge and kitchen. This is a tad over budget. To be honest for the area I was looking at max of £30psqm which is £1500 and then you have the underlay and trim etc on top. What would you recommend for underlay for the floor...

Hi, We are thinking of staying in the house for quite a long time - at least another 25 years+. We are also thinking of laying the same floor into the lounge (on the same floor) in our town house (1st floor). How often does it need sanding?

excellent - thanks for your help on that. You stated in the previous post about cost. Looking at this: http://www.ukflooringdirect.co.uk/Engineered/Florence_Engineered_Family_Oak_Flooring_180mm_Oiled.html For the money, would this classed a cheap and/or nasty or fairly decent? Basically...

might be a stupid question, but I don't really know the actual construction techniques.... On the website I linked to previosly (http://www.ukflooringdirect.co.uk/Engineered.htm?ref=1&sort=4a&page=1), there is several so-called engineed wood flooring, which have several different top-layer...

Hi, We are going to be ripping out the kitchen soon to replace it. Instead of laminate or vinyl, we are thinking of laying engineered flooring instead before the new kitchen goes in. - First off, is this a good idea laying engineered (rather than solid for example) in a Kitchen. Is there...

Hi, Thanks for the information - puts my mind at rest for when the wife insists on the induction hob! Thanks Adam.

Afraid not, we have just had our ceilings skimmed downstairs under the kitchen :( Yes, I know we should have thought about it before hand.. :)

Hi Guys, We have a 10mm cable going to our oven at the moment. On installing a new kitchen later this year, we might want to install an induction hob as well on the same cable. Looking at the requirement I think it falls very close to the limits of the cable, and just wondered what you...

I know this is a slightly pedantic question.. If you have a REALLY long switch cable length between several switches, do you calculate to the last switch and then back again? As this is the 'true path' of the current. For example: CU - - 5m - - (LIGHT) - - 5m - - 2W Switch - - 5m - - Int...

Hi Guys, Thanks for your replies on this, even though I haven't replied to them - sorry for that! I have been investigating other ways of achieving what I want with different systems. I have found that X10 suffers from a lot of noise. I purchased a few test units and found this noise on my...

Ok - I have made a to-scale diagram of what I am after. I have changed the details from the desciption above. Instead of using JBs, I would like to use normal connection blocks instead which will be screwed to the board. The board will be boxed in, but accessable. I have only shown an example...

I have also been looking into this. We are going for several spots in our lounge to make the room feel bigger without the pendant lighting. We have decided to have several switches switching combinations of different spots to create different modes and to some extent control the amount of...