Search results

bump

Hi guys I have a problem with hot water in my bath. When i use warm water after a few mins it gets cold for a minute and then back to warm and repeats the same process!!! This never ever happened before. All the water comes from the basement via a combi boiler. This problem only started...

how do you mean mate? also all we have done is put some vanish on them. but the door seem too wide by about centimetre, which cant be right.

Hi guys recently i had my house decorated. The plumbers/ decos had to take the doors off the frames in order for painting etc. The hinges are exactly the same, which are still on the doors. however when I have tried putting the doors back on, the door seem to not shut properly as...

thanks for that. is this okay? http://www.tooled-up.com/Product.asp?PID=161523&Referrer=googleproductlisting&gclid=CMSV5qvqwbMCFe7MtAod0gUAJw and is it easy to use?

Hi guys I had my walls skimmed about 5 months ago. I had plastic white switches on the wall at the time.... anyways I am trying to put some new metal affect light switches on the wall, which are quite smaler than the previous white ones. So therefore theres some gaps around the edges...

yes it goes hot, and then cold for abit, back to hot again

wot few things can it b

hey guys i have a combi boiler which has central heating and water connected to it from the basement. when I used to shower with Hot water, it used to be more or less at the same temperature throughout (hot). However now when I shower with hot water, it's hot for 20 seconds and then goes...

yes thanks for that... i will do that 2nite... in terms of the drain off point. There were 3 main cocks I saw. when I connected to 2 of them. it was like opening a tap, you could hear the feel and see the pressure. the 3rd one didnt have much pressure but at the start was like alot of...

THANK YOU ALL FOR YOUR HELP. Well I do have a few rads off at the moment due to decoration work going on. The valves are shut at those points. Would it be an idea to empty it from one of those points instead. if so, where shall i drain it from? the pipe where the thermostat is connected...

yes I have.... I connected the hose to the drain cock near the boiler. it let water out for 8 mins or so. then stopped. i opened some of the valves on some radiaotors upstairs. made no difference. pressure is still 1. please help!

anyone????

Thank you, i really need to know this info because there is a leackage in the house (upstairs) as its coming down the ceiling floor below. Do i need to drain each radiator individually? and also...I tried doing it from the boiler, 1 of the pipes lets LOTS OF WATER OUT at fast pace. So i...

i havr this boiler. And I need to drain it using drainfage cock. How ami I supposed to let water drain from the cock? this is my combi boiler? http://vokera.co.uk/wp-content/uploads/2009/04/unica-he-installation-and-servicing-manual.pdf

the problem i have had is... I dont know if im doing it wrong! I tried filling the boiler up.... with the already pipe connected at the bottom of the boiler. But the water started spirting out in some of the rad pipes which are disconnected upstairs. So I payed a pro to do it. He has done...

how would i do that? would that exclude the CH, rads etc?

is there a way of repressurising a combi boiler so that only the hot water works and not the central heating. Reason I'm asking is because we have taken the rads off due to decorating the house. The boiler has been drained and requires repressurising, to only allow hot water for taps and...

lmao!!^^ well i got this guy to come and do it for me. He did it. He filled the pressure gauge to 1.5 ..... and to my surprise there were no leaks!!!! After a week of using it, the pressure gauge went to 0 so he came and did it again. (only water, not central heating as some of the rads...

im abit worried now trying it. it feels scarey lol and wonder if its the right thing to do :'(