Search results

Thanks Lucid, just what I was after and such a simple solution too, think I was over complicating things but you do when it's not your occupation. Regarding the height of the TV I think that your spot on, I marked the position on the wall of where the TV is going to be installed and it is way...

Hi, guys just looking for some pointers and the easiest way of going about this. Apologies in advance for the length of this post but my head is hurting with this lot:D I've currently got a 46" plasma (approx seven years old) up on the wall which had a Humax Freesat box hooked up via an HDMI...

Gubbed boiler due to going on fire

Thanks will do the same. Kind regards Tony

Thanks Sam, your a diamond mate :)

There's plenty of places to get most of the stuff on-line Stivino but there doesn't appear to be anywhere you can just walk into off the street. I'll nip into B&Q later and have a look at what's available there. Those T and K brackets are heavy and some of them have to made to order...

Thanks for the replies guys. I didn't think asking an installer to sell bits would be a good idea but if that's the way the aerial industry works (?) then I'll give that a go, thanks. Yeah I've looked at Maplins/Screwfix etc but the mast size is an issue as 10ft seems to be the 'standard'...

Hi guys, anyone know of suppliers in the Glasgow area. I've tried searching on Google but all it throws up are installers. I'm looking for the equivalent of a plumbers merchant/ timber merchant to install my own FM ariel. I sourced the aerial from these guys below but I need a 6...

In order for the system to work like you thought it would work you would need two systems, i.e. boilerX2, pump controls MVs etc etc. Central heating plumbing and indeed domestic plumbing is really very simple, they've both been around in in their current form for the best part of 2000 years...

The only way you can heat your cylinder without your heating system for hot water is by using an immersion heater. The domestic hot water and central heating systems are completely separate, the MVs and the pump and indeed the boiler are all connected to the "dirty central heating side"...

You have to fill the system up to with water mate regardless of whether you want heating or hot water otherwise the boiler will overheat and conk out as there is no water to go round the system plus you'll probably damage the pump and MVs and the boiler by running them 'dry'.

That does sound like the newer version which also has an orange led, the old board just had two leds red and green. The new board kit is about the £200 range however I would change both the primary NTC and OH stat on yours first as these are relatively low cost at about £15 each. However...

If there's no display on the boiler then you won't be able to reset it if there is a reset button. If there's power going to the boiler and no display then it's more than likely a board problem but I'm not familiar with Valliant boilers just talking generally like.

Sorry but you've already said you changed the PCB fuse, just assumed you knew what you were doing. Live Neutral Earth=power supply to boiler, it's well marked just follow the cable going into the boiler and test with a multi-meter set to 600 ACV

BTW mate go for a 30 CDI, costs a wee bit more but a much better boiler. The junior 28i doesn't have a thermostat on the boiler for hot water BTW.

It's a summer promotion from WB, available via WBAIs.

Have you checked the LNE at the boiler's terminal strip?