Search results

Hi all, Does anyone have the above dryer manual please ? Going to see a friends one, it spins but does not heat up. Probably a stat but would like the book before I start fault finding Thanks John.

great point... hadn't even thought about that. thanks

hi chaps, I'm thinking of installing a water softner due to hard water in my area and have kids that suffer from eczema (heard it helps but not yet convinced...) Stuck a new ultracom 24cxi on the wall last year so should also offer some protection to that too. Any recommendations as to...

thank you both

afternoon all, we are having a downstairs chimney breast removed soon and i want to try to stop as much dust as possible from entering the kids rooms upstairs. I will keep their doors closed but is there anything i can put over the doors / door frames to really keep the dust out. many...

BG are taking on 2500 but they will be installing SMART meters. And for the OP, they are also taking on gas installation apprentices over the coming months so might be worth a look

Thanks for you advice Goldspoon, we'll check for both. Thanks again.

as i've said above, "I haven't seen his system as he only called me last night" I'm just looking for a few suggestions as to what the problem could possible be, not an in depth analysis

hi, a friend of mine has a indirect system. CH is fine but he has no water at all coming from any of his hot taps. I haven't seen his system as he only called me last night. I also do not know how long he has had this problem. I'm not sure what the problem is, possibly the float valve in the...

Hi, anyone know of a reliable boiler engineer in the NW9 (Kingsbury/Wembly area) I have a glow-worm compact 80E that won't kick in when CH or DHW is called for - Thanks, John.

thanks, to unblock the pump, would it be worth draining / cleaning the system or just try to bleed it - thanks again also, the noise is comming from inside the boiler, not any of the pipes. I can hear it now, sounds like a loud dentists drill

Hi all, I have a Glow-worm Compact 80E that has started to make some strange noises. When you turn on the CH or DHW I hear a noise from inside the boiler that sounds like an hydraulic lift or maybe a electric drill or saw. Once the CH or DHW is turned off, the noise can still be heard for a...

hi folks, I'm searching on the internet for firms that stock iron railing to put around the new patio we are building at the moment. Any ideas where i can buy this from ? Thanks :?

thanks for your help John

hi, i admit to not knowing much about gardening so need some kind hearted sole to pass on some wisdom. I've removed woodchip from a section of garden that runs the length of my garden (30ft) along side of the fence. There were loads of weeds that i have now killed off. I've dug up the soil...

Corgi, in my college, we couldn't apply for the NVQ2 grade without being employed by someone who has at least an NVQ3. For those not in the trade, top mark was a Level 2 Technical Certificate. Once in the trade, you can upgrade to NVQ2 as long as the leactures come out to asses you and your boss...

thanks Stan, I did read the instruction manual 3 or 4 times and the only mention i could find for the red Quad key was to use when adjusting for exposed or falling pipework. I can't see anywhere on the back of the unit where i can adjust this. Would i need to open up the control unit to get to...

thanks gazza and dave for your help - i'm in your debt! I'll give this a try.

i removed the temperature knob, unscrew the temperature hub and twisted the spindle anti-clockwise to increase the temp but still not really hot enough - even if i twist it as much as it will go- thanks

right, after messing about adjusting the max temp setting, i've got the hot and cold flowing fine. The problem i have now is the temperature doesn't really get hot enough! Can you please walk me through how to adjust the dhw on the pcb, i know where/what the pcb is but have never adjusted one...