Search results

Hi John, I managed to get hold of a kit and fit it and thoroughly cleaned the carb out with carb cleaner. There was one gasket and one diaphragm extra in the kit which I'm guessing is for another similar model. The only part I don't think is fitted correctly is a sort of steel flat piece which...

Thanks, probably best to bin it, don't fancy a tile falling off and going through the bath!

I have a tub of tile adhesive/grout which has been sitting in my garage for a few years. When I opened it it had separated with an oil type layer on the top. Will this still be ok to use as I've stirred it and it looks like when it was new?

Brilliant, thanks John, I'll give it a go and let you know how I get on Thanks for all your help, I really appreciate it. Best regards Dave

Hi John, That's unbelievable, how do you know so much just looking at the photos, I'm gobsmacked, thank you. I've looked at replacement carburettors but they seem to be around the £40 mark. A gasket/diaphragm kit and carb cleaner from GHS is around £15. My only concern would be I don't have...

Hi john, Thanks again for your help, it is appreciated. I've included some photos as requested.

Hi John, Thanks for the reply. I didn't notice any rubber diaphragm but did notice a sort of plastic gasket with what looked like a diaphragm built into the middle and another sort of foil circle on the carburettor that looked quite flimsy.

Does any one have any experience of fixing these. Stripped mine down as it seems to be starved of fuel as it just keeps cutting out. There wasn't any noticable blockages but still won't run, any ideas anyone.

paulandlaura, you seem to know your stuff with Gliderol doors. Could you possibly help with the issue in my thread below, other than get a new door and motor I don't know what else I can do as no one seems to have any idea what the problem could be...

Sorry for the late thanks, that's really helpful, thanks again.

Sorry, I should have been clearer. I want to use a micro switch as my garage is very small, when I put my car in the garage I want the switch to light a bulb so I know hat the car is far enough in so I can close the garage door. Therefore the switch will stay depressed until I take my car out...

Hi, could anyone tell me if it is possible to get a 12v micro switch that when pressed, and stays pressed will momentarily activate a small light bulb please.

I was hoping all replies would add value to my query, however it doesn't seem so with your Comment…......thanks to everyone else on the other hand, who have been helpful!

Hi, is there anyone who can possibly help me with a few issues I'm having with my Gliderol auto door opener. For some reason it lost all of its settings. I've tried to set this back up referring to the user manual and I just cant get it to work correctly. I cant set the door limits and I cant...

Hi, i have a number of smart devices that don't need a gateway hub which i have successfully connected to Alexa. I've bought an Aqara vibration sensor which i think i need a gateway hub for, both to get it working and also to link to Alexa. If i get an Aqara gateway hub will i be able to...

I have my reasons which I won't be going into as I don't want to bore anyone with too much, however the gate is so designed when it is shut it is locked, it was an expensive high quality gate as my son's safety is paramount hence why I'm posting on here to make things even safer for him! Thanks...

I thought of that but the ones I've seen are either too bulky or sound an alarm when they are open which I don't want when the baby is asleep.

Hi, does anyone know of a smart sensor that I can attach to a baby gate please? I would like to fit a sensor so I know if the gate is closed or open without having to go and physically look at it. Thanks in advance.

Thanks, is it the one at the top of the page?

Ahh, thank you for that. Do you happen to know what device I need then?