Search results

Hi I am going to fit a 2.4 metre mopstick stair rail with metal brackets to a solid outside wall inside the house I would like to use Fischer duo power plugs would 8 x 40 with 50mm screws be ok or should I use 10 x 50 with 60mm screws any advice welcome as i want to do it properly Thanks

Yes the replacement toilet in the photo has a projection of 555mm back to front edge one of the smallest I could find

I will save 185mm with new toilet fitted my problem is I have a door at front of toilet so not much left room at the moment when sitting on the throne the back wall of toilet is an outside single brick wall

The reason I want to do it is to create more space in front of toilet so a stud wall etc would defeat the object

I have a new compact close coupled toilet to replace my existing toilet in my utility room which will take up less space I will need to move the soil pipe connection a few inches closer to the wall to get my new toilet to fit is this a DIY job or should I get a plumber in ? Any constructive...

It appears it was purchased new and put in the garage and never used for nine years it is in brand new condition and I am very happy with my purchase

£60 in new condition, for drilling cavity brick wall to install outside water tap

I have an opportunity to purchase a 2015 model Makita HR2630 SDS drill will this be the same spec as a 2024 model with same model number ?

Could anyone give me an idea cost of tiling a kitchen wall above work tops with 50 x 200mm white flat ceramic tiles approx 4 square metres I am buying the tiles so just cost of fitting including materials thanks my tiler is quoting £380 ? In Tyne and wear area

I need to replace a faulty brass screw down stopcock as the internals are goosed because of over tightening it is in a difficult location low down at floor level behind kitchen units it would be much easier for me if i could replace it with a pegular 1/4 turn ball valve or a sure stop type valve...

What is the score with the bathroom catalogues when you choose a bathroom fitter he gives you a catalogue to choose the items you want for your bathroom refurb but I have seen a few identical catalogues inside with just a different company name on front and everything inside the same. The prices...

There is only RCD protection on the sockets ring main not the cooker radial

Should i fit 20A RC type MCB or just an ordinary type MCB at CU not sure if there is some regulation about sockets having to use RC breakers now

I see what your saying, if i fit socket as you say what size cable/flex should i use between socket and cooker cable outlet connection 6mm or 2.5mm

Could i fit a dual connection oven cable outlet with 2.5mm flex going to oven and 2.5mm flex going to a FCU to connect the gas hob gable which is only 3A load would that be within regulations bearing in mind i will have 20A MCB at CU and 6mm cable to cooker isolating switch and cooker outlet...

If i have a 20A MCB at the consumer unit can i change my cooker 45A DP isolating switch to a 2 gang 45A DP cooker switch with 13A socket using a single to double backbox converter to save me digging out the wall. Also can i safely run a spur off the cooker wall plate cable outlet to fit a...

Had a change of plan since we are short on sockets in kitchen we want to change the cooker DP control switch on kitchen wall to a one with 13A socket, below the worktop where the cooker outlet plate is for oven cable we need to have a socket there also for connecting cable for gas hob ignitor...

As I said manufacturer recommended minimum 15A fuse there is no cable or 13A plug fitted. A new gas hob will be fitted, previously it was an electric cooker with hot plates. It is designed. It is designed for Europe and UK