Search results

  1. Dan45

    Sharp corners in the shower

    Thanks for all the feedback! I agree, it doesn't look good. I can't risk the same tiler trying again on this one, I'll definitely ask around :-)
  2. Dan45

    Oak worktop splitting

    Thanks for the feedback - I've contacted the supplier. A carpenter came round yesterday and thought it was 'definitely a manufacturing defect'
  3. Dan45

    Damp in kitchen

    Sorry for the delay Burnerman. The damp is only in the bay - I've got some photos of the outside wall. There's some vents which are actually above floor level, which were there when I moved in a couple of months ago. Before I had the tiles laid, I got 2 deeper vents made (in the middle and...
  4. Dan45

    Secret Nailing sold oak with underlay?

    Thanks Doggit. So you can use underlay without floating? You just nail through the underlay?
  5. Dan45

    Secret Nailing sold oak with underlay?

    I have a whole house to fit with solid oak, 18mm x 125mm, varying lengths. I'm planning to secret nail it to existing floorboards which are in quite good condition. The skirting boards are big and impressive, and I thought it best to undercut them, rather than take them off. The ground...
  6. Dan45

    Cleaning newly laid encaustic tiles

    The suppliers told me to use the Lithofin MN Powerclean, but obviously that isn't working. There's also scratches on a lot of the tiles:
  7. Dan45

    Damp in kitchen

    They're stuck down unfortunately...
  8. Dan45

    Damp in kitchen

    Thanks for your reply John. I'll have a look when I go there today, and take a look
  9. Dan45

    Sharp corners in the shower

    I recently had my bathroom tiled. The tiler used a metal edging, but it's left sharp corners on the recessed shelves. Is it possible to file these down? Also, he's used big blobs of adhesive under each tile, leaving cavities around the edges. I know this is sealed with grout, but could...
  10. Dan45

    Oak worktop splitting

    Hi, I've recently had an oak worktop installed. It's only been there for about a week, but there's a crack appearing where the planks have been glued together. It's very small, about 0.5mm. I'm worried that it's going to keep moving? The worktop was sanded flat, but now you can feel the...
  11. Dan45

    Cleaning newly laid encaustic tiles

    I've had encaustic tiles laid in the kitchen. Despite my instructions to keep them clean, the builders have tread a lot of dirt into them, which I'm trying to remove. It's quite possible that the tiles became dirty before they were sealed. He has tried using a floor cleaning machine which...
  12. Dan45

    Damp in kitchen

    I recently had my kitchen renovated, in a Victorian terrace house I've just bought. A couple of weeks after painting, damp has started to show above the skirting on both the external wall (underneath the bay window) and internal wall next to it. Under the bay window: The internal wall...
Back
Top