Search results

  1. O

    Adding basins to pumped supply

    Hi all, I am istalling new basins and monobloc mixer taps in 2 bathrooms. The pressure through the new taps is very low compared to the previous installation. There is an existing H&C 22mm pumped feed to each bathroom for the showers. 1) Can I take a feed from the existing pumped supply...
  2. O

    New shower non return valves

    Hi I have bought a new shower and it comes with large 15mm - 3/4F BSP chrome elbow connectors. These connectors are designed for exposed installation, however this shower will be recessed. due to existing pipe routing from previous shower, I would like to fit similar (but straight)...
  3. O

    Shower pump query - uneven pressures H&C

    Hi, I have a Mira PPT3 feeding 2 showers. The pressure of the cold feed to both showers is significantly lower than the pressure to the hot. I have checked that both sides of the pump work independently. The cold feed to the pump is gravity fed 22mm and the feed to the hot side is tee'd...
  4. O

    Bathroom upgrade RCD

    Hi all, I am planning upgrades of two bathrooms and will be installing new down lights and extraction. I understand that these items will require RCD protection. I have trolled a number of posts on here with a variety of advice. It would seem the easiest solution is to install an RCBO in...
  5. O

    Bathroom extractor from 2 bathrooms

    Hi all, I am currently planning upgrade of two bathrooms to which I need/want to fit extraction. Is it possible/legal/advisable to fit one extractor motor in the attic with ducting from both shower areas switched from both light pulls? Thanks in advance for any advice.
Back
Top