Search results

Cant afford one till july when I get a new cu fitted.(at moment saving to get boiler fixed) But need my ovens to work They are two 16 amp ovens so a 32. I would do a test on the earth to make sure it has good bonding. Do a test on the neutral. make sure the breakers work with test button...

Incase anything else got added in furure but highly doubt it. I found a wylex 32 mcb in screw fix for under a fiver. Im sure I have a 32mcb in house somewhere but its a diff manufacturer mkm I think . Would another breaker fit a wylex box

Had a look at the wylex cu. It has a 6 mcb and 40rcd so just need to put a 32mcb in for oven. Should the 40rcd be uprated to a higher one.

Hi ban Its cause the instructions say to use 16amp protection. Smart meter aint final and can b cancelled. Only wanted it for the energy usage display and free leccy on a Sunday/Saturday

What do you mean

Lol ban all sheds. Typing on a small phone. The main cu doesnt have a rcd its a wired fuse one. The additional cu was a existing one, it used to run a 10kw shower. Had a 40 rcd allready installed. And working with the shower.The 10mm cable was swapped for 1.5mm to shower. This cu was...

Hi. No its an additional cu thats joined to the fuse box. Its not a power shower its a digital shower. Yes it's a new circuit that's connected but not commissioned yet. The 6mm cable comes from the additional cu to the cooker switch that then goes to the dual appliance plate that the ovens...

Hi guy's. I got a bosh series 6 single self cleaning oven (16amps) And a bosh series 6 combination oven (16amps) Both have fitted leads like you would see on a kettle. They are connected to a dual appliance connection point. That goes to the isolation switch (40amp fitted with 6mm to the...

Thanks for replying. I sorted it by using glue and sawdust filled into gap then smoothed. I then stripped the white vinyl wrap from a off cut. Cut the old wrap off the damaged area and replaced it Matched in nice.

Guys. I was cutting a decorative tall fridge housing gloss white claddon panel. Had it clamped with pump clamps and used my circular saw and the clamp failed. It cut a 6 inch line accross panel. Its at top of panel against wall. What can I use to fill the cut and match it to gloss white...

Yeah going to tile it. I will try again. See what they offer. If anyone's interested job is in Glasgow

Tryed to get a guy to mire it from myhammer but costs were over £ 150. Heres some pics of worktop. Theres small 3mm gap cause units out .

Thanks owendiy. That bar is for joining two pieces of straight together. One I want is a corner but each face is square. It has no radius. Will post pic tonight

Not in house but will load one up tmz

Thanks doggit. They havent been routed for bolts (long story). So I bought worktop joining plates (square plates with screw holes in them) One bit still has the laminate on it. The other cut. If I pva or clear silicon it. Do I then use colourfill on it to hide the line ?

Ohh drat . Hopefully someone will sell one

Thanks foxhole. That looks ok. The t shape. Will fit both sides. Good price to. B&screw charge £8 for same make ones .

Hi guys. Got two bits of worktop that have a square edge profile. The corner join bar I got has a 6mm round radius on one side. But doesnt go over the square edge or worktop. Ive been trying to find one that I can use to join two square pieces together. I got one from sf but didnt work...

Its just the sleeve to hokd the 1/2 bit

Anyone