Search results

Please add photos of the other consumer unit(s), the meter and any other equipment in that area.

No idea where most of that came from or what it has to do with your house being full of mould. There are many choices you can make. You have chosen the mould.

All that does is increase the surface temperature of that particular wall slightly. Any condensation will be more likely to occur somewhere else. At best, this shifts the problem to some other wall. Total waste of time and money, those things will take weeks to extract what a powered...

Temperatures lower should not be required, these thermostats are factory set to an appropriate value and should never need any adjustment. The fail where people turn them up is because they break the thermostat part by cranking it to the max. Usually the same people that believe turning...

If you are watching Freeview you need a TV licence. Whether it's BBC channels or not changes nothing.

Is the tenant opening it and twisting the temperature adjustment?

Every google search result is unique, specifically tailored to the user based on a vast array of different factors. What is searched for will also be used in multiple ways for various purposes including future search results. This is why all of theses 'SEO' companies claiming they can get your...

What do you imagine will happen when you heat a 110C thermal fuse to 180C?

Documents here: https://www.thpg.com/en/vde-certificates

Either a new galvanised box fitted flush with the face of the panels, or if you have already installed the panels, an extender box of suitable size: https://www.yesss.co.uk/galvanised-steel-extension-box-2-gang-25mm on top of the existing one. Suggest you spray paint the box black before...

Yes, they can fail. That isn't the problem here.

The only time that will be happening is when the appliance is broken - which will mean pulling it out to replace it regardless of the presence of any switches. Might happen perhaps once in 5 years maybe.

Those are only of use for detecting large items such as vehicles constructing the gate. The absolute bare minimum. Sliding gates need sensors that cover the full height of the gate and posts at both ends, so that they don't crush objects/animals/people that are in the way, including where...

Edison promoted DC as that is what he supposedly 'invented' and was therefore financially invested in having it used. At the time, DC was very far from efficient, as it was next to impossible to convert to different voltages, with the result that voltage dropped significantly as you moved away...

The terminals themselves Where those terminals connect to the circuit board inside The switch(es) that select between speakers A and B. The protection relay which switches the speakers on after a short delay.

It needs way more than 1mm. Gap between gate and track should be the same across the whole width of the gate in all positions between fully open and fully closed. Either that gate is distorted or the track is not level. The gate company information is correct - there is only one solution which...

They are noisy, use electricity and wear out so will need to be replaced at intervals. Possibly of value in situations where the incoming water supply is feeble and also can't be upgraded. By doing what? If the incoming cold supply is suitable, the usual method is to remove the vented cylinder...

New connectors can be obtained such as https://www.toolstation.com/spare-lampholder/p99286 or https://www.toolstation.com/spare-lampholder/p93364

Lights with no connector are non-compliant junk, probably direct imports from far away. In any event, that existing connector is not intended to be reused for the light fitting side.

There is no truth in that article. 100% fake news on a 100% fake site.