Search results

Moisture speeds setting once set its completely inert only solvents can dissolve it. Where did you obtain this false information?

We are all immigrants , only difference is time . Same old bullshit to divert the gullible from the real problems . Seems to be working for Trump too .

Foil tape.

Heaters have thermostats , they have to. Make ? model numbers ? Has to be on any electrical appliance .

No it can’t requires a solvent to dissolve , who told you that codswallop ?

No same spigot is fine , it simply has to come from above the spigot .

Hose needs to follow red route behind dishwasher into top of cupboard down to spigot.

You don’t need a longer hose , the mistake is in taking it down instead of up from the back of the machine so it enters thru the side of the cup , then down to spigot , you have plenty of hose to do that .

Depends on style/ thickness of splashback and upstand .

You could glue a couple in with decent adhesive .

Vertical timbers will have bricks between usually a single skin, very prone to cracking , I removed mine in previously property and replaced with new timber and ply face which was then clad .

Zinsser B-I-N Shellac-Based Primer Is one option

Did you prime timber?

Could just be worn/sticking hinges, have you lubricated?

Only for my daughter who had to wait for her decoration to be finished .

Maybe take a look , the window is the big opening in the wall you can see thru.

Do you have wall vents or sash windows near the party wall , they would by-pass any sound insulation making it ineffective .

Cut out the square , fit timber above and screw plasterboard repair to it and make good .

How old is kettle

Take up floor and sister joists to level , lay new floor. Though a slight slope would not bother me unduly as long as it’s flat.