Search results

I have just noticed that the toilet over flow is not connected to anything ie ,if it overflows it just goes straight onto bathroom floor, dont know why i just noticed it. What is the best way to resolve this .the overflow pipe is on the bottom lhs Thank you

Thank you all fitted and flushing good

Ok thank you all

Sorry this might be a stupid question going to get the part today as been on hol there is no isolating valve on the water inlet fill, do i have to totally isolate the water to change the valve, if thats the case i will do it at the stopcock

Thank you the pipes were installed approx 12 yrs ago in the ensuite i will take the bath panel off and investigate

Hi all sorry another question when we turn a hot tap off in our upstairs bathroom the pipes near by make a banging noise ,if you turn the tap off slow is doesnt .the tap is a mixer tap and fed off a baxi combi, any ideas for me to start checking ,a similar issue happens when you do the same with...

Morning all I have issues with the toilet , it is around 25 yrs I was wondering if you can change the whole syphon as it takes along time to fill up aswell I have enclosed a pic , can anyone recommend a replacement thanks

Hi all has any cctv eng had this prob before two camera cables are picking up high ac voltage when testing between the coax outer shield and the dvr bnc earth getting 30vac on one cable and 3 vac on the other . It has blown two dvr already and reluctant to fit another to this ac has gone have...

Thanks will sort one now

Thanks I wil get one thought I would get away without moving the pan but needs must. Thanks again

Morning the waste to the soil pipe is started to cracked and needs replaced it is not leaking just looks rubbish I have enclosed so pics is it easy to replace and what is the replacement needed called thanks

Hi all just an update sorry for the delay I got a good deal on a bristan shower for an extra 10 then the Venturi so replaced the shower and all has been good thanks you all for your help

Hi there diaphragm was changed a few months ago I have no issues with hot water from taps diverter valve changed last year will have a look at Venturi need to get hold of. 24 mm ring spanner I have all sizes up to 22mm lol thanks again all

Hi all i got a new venturi ass got the boiler cover off on the diagram is it the 23mm nut thats hard to get to lol where the venturi sits

Also you could go into engineer mode go into option 51 parameters and there is an option restart gets rid of errors

Ok thanks I will have a look

Evening all I reduced the temp on the boiler this morning it worked fine tried it again this evening and it didn't ignite the boiler until I told the hot tap on. Then was fine I watched the boiler whilst shower on after 20secs the flame went out the started again any more suggestions pls I can...

Thanks all I will have a go later

Hi there I only need to turn the tap on once if I run a hot tap I couldn't keep my hand under for one min it would be to hot Thanks