Search results

i have just laid a black slate patio and would like to grout/joint the gaps with black cement 1 can you buy black cement 2 if not do i have to mix wit a dye etc any imfo would be greatfull

hi have a 24v impact wrench ,1/2square i have seen a dewalt addaptor that will turn it into a driver , has any one used one of these ? or is the wrench a diffrent beast to a driver ? it seems pointless to buy another drill if all i have to do is buy an addaptor

i have a 2,a 18v dewalt battery that no longer holds a charge , is there any way theese can be fixed or do i have to buy a new one ?

How much material Ie ballast cement etc to build a path 14ft long x 2ft wide 4inch deep any help would be appreciated

I Have a petrol stihl chainsaw 017 its been working fine , i was useing it yesterday ,put it down to refuel it and now it wont start , i have checked that the fuel is getting through and i have a very good spark at the plug , i have taken air filter out and cleaned it , but it still wont start...

anybody have any ideas on a drive way , iits about 50sqm ,i was going to block pave it but i cant really afford that much , is there any gravel mixed with some sort og clooging agent so it wont dissapear any ideas welcome

my garage roof has blown down and the insurance comany has asked me to get qoutes for to replace the roof , at present it is fibre board but most of the builders who have had a look have advised me to use marine ply board coverd with felt like you have on a shed , i have no problem with this as...

i have a stilh ms 180 chainsaw it starts and runs well , after about 10 mins it seems to have no power ,it revs ok but as soon as i try to cut with it the engine stutters and sometimes cuts out , she fires back up ok and maybe ok for a while then does it again , i used her this morning and she...

i have a stilh ms 180 chainsaw it starts and runs well , after about 10 mins it seems to have no power ,it revs ok but as soon as i try to cut with it the engine stutters and sometimes cuts out , she fires back up ok and maybe ok for a while then does it again , i used her this morning and she...

can anybody give me some advice on insulation and heating of my garage its a single breeze block with a asbestos roof , can i put some studding up and fill with insulation then cover with board ? and so same with roof any help would be appreciated

i have just bought a retractable air line , i asked the shop if it would fit my air tools and they said it would as its a standard fitting . The problem as i have now discoverd is that the hose i bought is a 3/8 and the tools i have are 1/4 , i have asked the shop but they say there is...

i have been given about 20 bare root ash trees which i hoping to turn into a hedge , how do i plant them ? ie how far apart ? how deep ? etc any help would be appreciated

I have a merc c class 350 avantgard i had a warning light come on and i took it to the garage and they told me it was "Intake and exhaust camshaft position sensors on right engine bank" now i know nothing about cars so could anybody please explain what this meens i think the garage are trying...

Hi does anybody know how much is likely to cost to have electricity supplied to my garage ? it is not close to my home and i dont want to run a genie as the noise would be to much of an impact on the neighbours . I have a electricty pole about 100 feet away from the garage so they can take a...

i have just bought a 24volt impact wrench ,i bought this so i could get the wheels nuts of my transit , Soft grip, variable speed, forward & reverse, electric brake, 1/2" square drive No load speed 0 - 2000rpm, impact frequency 0 - 4000ipm, maximum torque 400Nm 295ft/lbs Led Battery...

i have a honda wacker plate that i havent used for about 6months , i started it the other day and it started ok , it ran for about 3-4 mins then cut out , it started again and did the same thing , so i changed the fuel for fresh stuff cleaned the air filter and replaced the oil but it still...

i have a ms 180 chainsaw that wont start , i have changed the fuel , sprk plug (Nice healthy spark) air filter but she wont start , i even tried it with easy start but nothing shes not that old about a year and i only really have her as a second saw as i use a much bigger one for work ...

Can anyone tell me what nails i can use with this gun ? will these fit http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=150443335062 or can anybody tell me where to buy some from , i have asked my local builders merchant but they only sale paslode nails and as i have a im350 i dont need...

i have just bought a transit tipper from the council and have found two electric out lets on the rear tow hitch nect to the actual power for trailer etc , these are 3pin not like house plug butlike the ones you get on commercial plant , now my question is what is the likely power rating from...

i am about to make a close board fence question is what do i use to fasten the boards ? do i buy a nail gun ? if so what one ? what size nails would i need as the boards are 1/2 thick and im attaching them to a 3"x2" rail any help would be greatfull