Search results

A few years ago we removed the chimney above roof level due to recurring leaks and other issues. It was removed, the roof made good and tiled over. The chimney now ends in the loft, below the roof timbers on the inside. However, it was left like that, so the two chimney holes that feed the...

Really strange one... it's been a while since I installed a Texecom unit (and that was Veritas) but I've just installed a new Premier Elite 24 (wired) panel. All zones are working, and I can set the system, but when the system alarms (when I fail to enter the user code on entry) but external...

I have a Premier Elite 64 with a 32XP-W which is handling various wireless sensors. The alarm keypad is showing Supervisor Fault on all the PIRs and shocks but the door sensor contact is okay and registers the state correctly. I loaded Wintex and everything looks ok settings wise, and...

Hi All I've just replaced an old Veritas 8 Compact control panel with an ADE/Honeywell LogicSix (with built in key fob) but its the same as the Gen4 etc - https://www.security.honeywell.com/uk/documents/Logic%206.pdf I've got everything working apart from the external bell box. First of...

Hi guys Need to replace our existing driveway as block paving has badly sunk. Its an old drive. Had the following quote for an imprinted concrete drive. The area is flat and around 46 sq. metres Excavate proposed area and lay clean MOT type 1 aggregate and compact to within 5% CBR...

Hi all, Hoping you can advise :) We've bought a new basin and a mixer basin tap. I'm struggling to work out what we need to connect the taps to the existing pipeworks. The tap takes 2 x 12mm screw-in connectors which I'm ok with. The existing isolator valve when we take the old taps off...