Search results

three toilets in the house all with the same duel flush valve. not every time but after flushing cystern water sometimes keeps flowing into pan. is this fixable or do they all need new valves. these valves are the ones with a wire connecting the buttons to the valve. Cheers for any help.

Fitted new PCB and potentiometer switch but nothing on the pump L. Only light on is Boiler on. Can anyone help?

Just now and again when walking into bathroom I hear a clunk from the pipes which I think are under the floorboards. This noise does not seem to be set off by float valves or taps being turned off. I have serviced the float valves in the house and even put a water hammer arrestor in the pipework...

Only have two rads on the ground floor both on drops from first floor. Plenty of water flowing from flow and return. Cant seem to pull any hot water in to the rads, valves are fine. Pump sounds a bit rough but spinning. three way valve seems good. The boiler is a Potterton 45 back boiler. The...

Got a baxi in the garage needs reseting when ground floor rads come up to temperature. ( Takes about 24hrs to do this) 1st floor rads heat up nice and quick. Rads on ground floor all on 15mm copper, some microbore upstairs. Could this be sludge in the pipes, what about a power flush...

can anyone give me the name of a good quiet pump for running two showers? (Airing cupboard in bedroom) cheers!

I need to install a shower off a combi system. The walls are all nicely tiled so the pipe work will have to be on the surface. Does anyone know a good shower valve that would fit the bill. Budget about £150. Cheers!

I have a power shower that used a Watermill 2bar pump. The supply for cold comes from tank in the roof space. The supply for the hot comes off the 22mm running down beside the hot cylinder. The last guy did not put a flange on as the cylinder has only got a 22mm male thread brazed on top and as...

Hi, can anyone help. Two showers supplied by one pump. One shower works fine the other is very weak. duff shower has recently had a new shower mixer valve, no joy. Can someone tell me what to look for. I cant see how it could be a blockage as there should be filters in the pump inlets. Cheers!

Can anyone give me some help. I intend to fit this bar shower mixer, going to channel out the wall fit the mixer supply before tiling. Want to do things right. Supply is from a combi boiler. Cheers!

When I run the hot tap the tank in the loft makes a noise. Is it the ballvalve? if it is do I just change it. What is wrong. Can anyone help.