Search results

what would be the best solution for outside wallwash lights going through a 2ft thick granite wall for termination .

how about £250 thats what a plumber wanted to charge me

how much should it cost to change over a kitchen sink , basically new for old no alterations to pipework etc

wired up gloworm boiler there are 2 valves heating and hw.the t/clock when it calls 4 hw the boiler fires up valve opens but after about 45secs it cuts off any ideas only seems to work if c/h is on at same time?

so what would be his day rate?

what you on about ban all sheds?

how much would a tiler charge for taking old grout of tiles and re grouting per hour or sq metre? :?

has anyone installed trace heating for gutters any info would be good .eg how to terminate the cable at stat and what you do with the end of the cable

so would that be a regulation

what are the regs on single electric oven which is built in to units connected to a 13amp fused spur behind it with no other means of isolation outwith would that be allowed ?

it now goes stone cold every 45seconds

i have a combi boiler when i have a shower now the water fluctuates between hot and cold the shower is a mixer one it used to go cold if the hot tap in the kitchen was turned on but only then any ideas

a 6kw water heater what sizeof cable should my sparky use 10m run approx

thanks 333rocky333 most helpfull .didnt realize i was going to open such a can of worms with a simple question !!!! :!:

so basically no one has a solution to the problem

can anyone suggest one for a 1300w heater outside a pub for smokers i have fitted 2 and both have stopped working they were suitable for 1400 w

has anyone wired a polypipe single zone master (pb1zm) there is a programable room stat with it on the diagram it says a volt free contact boiler or s/l connection boiler what does it mean by volt free contact boiler

how many connections do i need from a viestman boiler to the underfloor connection unit ?

i am just lack of confidence

a 2.5 swa would be ok