Search results

Helps if you add the pic though eh!!!!

Thanks RF here's the pic, I guess you mean that earth cable at the bottom, so at least it is there. :D Also, given that I will be adding a further two showers, (ensuites), what size unit would you recommend? The house is 4 bedrooms but I think not very well built in the firstplace :cry:

P.S. Not just the key the whole bloody garage, it's a dining room now :wink:

Thanks RF guess you've confirmed what I thought, new consumer unit it is then. As for the earth lead, this is the unit as wired when house was built in 1984 so I assumed it was wired correctly, if not I'd better get it checked out. Again many thanks

Hi guys I'm fitting a new shower and could do with some advice. The shower is a 10.5Kw unit The cabling will be 10mm, the run consisting of about 3mtrs to ceiling mounted switch, then 4mtrs across the loft plus a further 4mtrs down to the fuse box, and this is where the problem starts. The...

thanx gcol was hoping someone would say that :D

Sorry guys uploaded wrong pic :?

I just ripped out my old open fire and opened up the hearth to fit a multifuel stove. I'm lining the fireplace with large 60cmx30cmx1cm porcelain tiles directly onto the concrete blocks, see pic,. What's the best adhesive to use here. All the heat resistant adhesives I've found are in small 1kg...

thanx guys guess it'll have to be the 3/4" warix at least I can get one of those in BandQ on a Sunday.

So if I fitted a 3/4" warix and used 15mm to 22mm reducers would this work? I'm a little concerned about voiding the warrenty on the pump.

well the warix flange is definately 1" and it's bigger than the original flange

As you can see there is no reducing bush in there.

sorry that didn't work

yep here it is.[/img]

pics by me

I'm fitting a new shower pump and bought a 22mm warix flange as advised in the installation guide, but when I disconnected the flange on top of the cylinder it turned out to be a 3/4" outlet. The warix is obviously 1" does anybody know if there is an adaptor available, 1" female to 3/4" male...

OK Managed to unblock that bleed valve got rid of an airship full of air. :D Went round for half an hour checking for any other blockages and guess what we're back up and running, mind you I can see this system is a b-----d :x to bleed. Just got one radiator staying cold now, but Ill...