Search results

Hi all. Maybe someone can shed some light on this problem. I had a new radiator (downstairs kitchen) fitted about four and a half years ago after a kitchen refurbishment. Its quite a large upright double. After the heating has been on for about 3 hours, only the top of the radiator is feeling...

Hi all and thanks for all your replies on this topic. I have now purchased another Digistat room thermostat which is a wireless model. This appears to be working normally. Problem solved (I hope!)

Thanks for your response ianmcd. I think your right. It didn`t say RF601 and there was no radio mast symbol in the lcd display. I have now returned it to B&Q and will try to source another from elsewhere.

It says on the box Digistat+ 30002 ( no RF601 ) I`ve noticed on the display screen there isn`t a little symbol on the left of a radio mast but it shows it on the box. Could it be the new one is just not working properly?

Had to buy a new Digisat+ 30002 room thermostat as the old one became faulty. The new one will not "pair" with the SCR receiver next to the boiler( Vaillant ECO Tec). I have followed the installation guide over and over again but the SCR is not receiving any signals from the new thermostat. Can...

Thanks again.

Thanks Agile. Whats your opinion on second hand refurbished parts ( with a 12 month guarantee ) ? They are much cheaper than new ones.

Thanks ianmcd and Chris_W

Hi all . I`m getting the F61 & F62 fault codes on the above boiler ( about 12 years old, serviced regularly ) Should I get the PCB changed or the gas valve, or both ? Thanks for any help or advice.

Hello `Bunny ` I`ve used said engineer before and so has my daughter so he was the first one I called. ( Probably wont use him again tho, not at the rates he charges! ) So tell me, how do I contact the best 831 engineer in my county for future work ??? I don`t suppose I have any comeback now...

Hello all. As I said previously, the engineer came today and had to change the diverter valve ( £280.00 +vat !!! ) which was leaking. He showed me the inside of the old one which was a bit gunged up and looking a bit rough around the spindle. So the total bill for parts, fitting, service and...

Hi Simon, thanks for the info. I`ve got an engineer coming tomorrow to service the boiler ( I`ll see what he makes of it ) Is it something I could do myself ( I`m quite a competent d.i.y.er ) and any idea of the cost or should I leave it to the engineer ? :?

Hi Tony, I drained the water out using the drain cock on the C.H. flow pipe on the underside of the boiler. The leak is oviously from inside the boiler itself, its just dripping out the bottom of the casing on the left hand side. :?

Hi all, Had to drain some water from my C H system which resulted in a drop in bar pressure on the boiler. Topped up the system but the needle on the small dial went into the red zone. Drained of some water to bring the needle back down but now have a small leak coming from the bottom of the...

Hello, Can anyone out there enlighten me about my DRAYTON DIGISAT wireless room thermostat.( 1 ) On the remote unit the `change the battery` symbol keeps flashing even after I have changed the batteries. ( 2 ) On the recieving box next to the boiler ( Vailant Combi ) the red `alarm` light...

Hello All First the basics:- Boiler is a Baxi, I think the model is WM60/£RS - GC No 41/077/04. Boiler is working - Hot water is very hot, Problem is the radiators - upstairs get hot, only two of the four downstairs get hot. The other two do not warm up. All rads. have been bled until water...

Hello all, First some basic info. My daughter has just moved house. Boiler is a Baxi, I think the model is WM60/3rs - GC No 41/077/04. Boiler is working - hot water is very hot, problem is the radiators- five upstairs get hot, only two of the downstairs get hot. The other two ( lounge and...

:) Thanks for your replies Simond & Mickyg. Have drained some water from the system using the drain cock under the boiler and this seems to have done the trick. Pressure gauge now shows needle in the dark grey zone. In hindsight I think problem may have been caused by turning on a radiator in...

I too have a similar problem.( Vaillant ecoTEC plus 831) Woke up this morning to no central heating. Checked boiler- water pressure too low. Read instruction booklet on how to increase bar pressure. Opened up the two grey valves underneath the boiler, pressure has now increased but dial pointer...

Thanks a lot Dave, thats a great help. :D :D