Search results

Hi all, i`m fitting a manrose inline fan to my shower room, i am struggling for space so want to know if i will be ok to drop the exhaust side of the unit down away from the unit about a angle of 45degrees and about 3metres long hose then to the outside, cheers mick

happy new year all, ive got a single bulb light fitting in my garage, the wires are as such in the L section there is a wire for the bulb then a black wire with red tape on it, next section Loop 2 red wires, next section N a black wire then the other wire for the bulb, the other light i want to...

hi all,i`m going to be removing some radiators but when i come to refitting rather than use PTFE tape what paste can i use in its place to seal the treads cheers mick

hi all, i removed a single radiator and tried fitting a towel rail, big problem the pipes are about 20mm from the wall and the connection for the rail are about 70mm from the wall, is there a easy way round this, also my heating system is on a combi boiler do i just turn the water off under my...

hi all, could anybody please tell me were the sensor for checking the surrounding air temperature on my fridge/freezer is located on it

hi all, i`m going to build a raised flower/veg bed single brick wide 4-5 course high , can anybody tell me how big a footing H-D-W i should put in, cheers mick

hi all, i laid a floor using 20mm hardwood engineered boards on a floating floor and made the biggest mistake possible by nailing them down so now they creek like mad when you step on them , can anybody give me some surgestions how to stop them creeking with out taking them up, i also layed the...

8)

hi all, last year had a freezer go down in the garage due to the cold weather, so have bought a small chest freezer, to protect it from the cold have thought about putting polystyrene sheets around it and on top but leaving a gap between them and the chest, what do you think !!! cheers mick

hi all The lock on conservatory door has been playing up, it use to be just winter with the cold but we had the door glass replace recently and now it`s all the time, i see there are some striker plates but need abit of guidess which to adjust i don`t want to make it worst then it is, so all...

:) hi all, i`m going to build a 4 sided wall for my fish pond out of breeze blocks, the blocks will be layed flat and 4 blocks high, what i would like to know please is do i lay the mortar "5 to 1 mix" to cover the complete block or just along both the longest edge, cheers mick :D

hi all, i have a indesit fridge freezer model number BAAN 10, it is in a very cold garage but as stopped freezing, can you tell me if it is because it is in the garage the unit is only about 18month old, cheers mick

hi all how much am i looking at to have a arch way hole 240cm x250cm bricked up, and about same size unloadbearing wall removed, both plastered up by a builder, cheers mick 8)

hi all, one of my shower doors dropped off, the roller as snapped off at the top, the roller is about 12mm dia and split so it can run on the ridge-track and the bracket that held the roller was held in place by a screw which also secured the glass to the frame, can anybody surgest any web sites...

hi all, i`m thinking of putting a car-port at the side of my garage, what i would like to know is before i lay the concrete do you have to lay hard core because people i`ve asked all say yes and i`m not so sure you have to, all advise welcomed, cheers, mick

hi all, still having problems with this shower mixer valve, the valve is a meynell V8/3 thermostatic shower valve, the combi boiler is a worcester 350 combi, the hot water coming out of the shower is cold, when the shower is running i`ve check the boiler for demand and there isn`t any not until...

:D hi all, i`ve had enough of lack of hot water coming out of my shower which is combi fed, i`m going to rip the mixer valve out and put in a electric shower, what i would like to know is apart from solded fittings, what other joints would you recommend and the name of such joints to use in my...

hi all, any idea how much it would cost to re-gas a beko model cda5411fw fridge-freezer, i live in the upper part of lincolnshire, mick

hi all, i`ve got a fridge freezer BEKO make, FROST FREE, "a class" ,its been making a gurgling noise a couple of days the fridge part is not cold and the freezer as defrosted, does this mean its dead or something else, the unit is about 5years old, cheers mick

hi all, new to site, i have a meynell 8/3 mixer thermostate control shower running off the combi but the hot water just trickles out of the shower head if at all, i`ve replaced the cartridge in the mixer a couple of times and adjusted the temperature on it but still only a trickle if i`m lucky...