Search results

Thanks, I was replying to a query by alastairreid

Thanks for your reply. I can post a picture but yes , it is the undercloak at the verge.

Just been looking at the eaves trays you advised me about. I used synthetic slates at the verge for pointing. I placed these slates on top of the felt not knowing the problems I was about to encounter with the felt at the eaves. Am I right in thinking the felt should have gone on top of the...

Many thanks for your help

The pitch of the roof is 25 degrees. When I use the fascia board to rest the eaves tiles on, the felt which goes over the fascia board into the guttering has no natural flow downwards. It has to rise to the top of the fascia board and into the gutter leaving a valley where water will collect...

Thanks for that , you have been very helpful. Cheers

Thanks for helping me out so quickly. It is appreciated.

Thanks for your reply however I have read the information you have sent several times today but can not find the minimum guage. Thanks for your help , it is appreciated

Can anyone tell me if these tiles have a minimum guage ? I can find nothing on their website. If I intend to use a dry verge system for these tiles , what should the maximum overhang be ? 50mm ? Are they easy to cut or best buy the 1/2 and 3/4 tiles available ? What suitable ridge tiles for...

Hi, I am competent and asking for some advice , not to be confused with a smart ass like yourself thinking he is above it all to offer assistance

Hi, I have had a problem for the last three days with the boiler not lighting whether on hot water or central heating. Checked exhaust fan is operating and that it is operating the air switch which it is. Water pump runs,exhaust fan runs and the gas solenoid operates. When the gas...

Hi, Is it possible to use multistrand welding cable for panel wiring ? I am making up a generator ATS panel and as the welding cable is so flexible, it would be easy to use. Or do i have to use another multistrand panel wiring single core cable. Any help appreciated. Graham

My radiators have not been getting hot for years so decided to do something about it. The boiler is a Radiant RSF 24/E combination boiler. Turned off power to boiler, drained each radiator in turn , fitted new bi directional TVR and lockshield valves to 7 radiators but left the bathroom...

Noseall,Vancleef,thanks for your help.

Im an electrical maintenance engineer not a roofer,if you didnt guess already

Thanks again for your help. Glad I could cheer you up. I had another lousy day.(as you can see). Obviously before I can fix the tiles down,they must fit correctly. If I lay all the bottom row(course as they say in the trade),temporarily block them up(until my fascia arrives)to see if the two...

//www.diynot.com/network/graann/albums/

Hi, I fixed three battens as you described,being very careful with the measurements. The piece of wood at the front on one of the photos is just a temporary support while i was lifting up the front tiles. Whatever I tried to do,I couldnt get it right. The tiles shown are only resting...