Search results

Hello, I think I must had got a bad one of these. I have checked the machine again for any blockages etc. and all is clear but it has cut out when been used and the red light is staying on? I presume that this is according to the ,manual linked to some form of thermal protection device built...

Hello to all. for some time now we have lived with this problem. when we flush one specific toilet in out house we experience loud water pipe noise . i have had a look in the cistern and the noise starts just as the float arm is nearing the top of its travel, i can stop the noise by manually...

http://www.viessmann.co.uk/content/dam/internet_uk/wb1c/wb1cinstallationinstructions.pdf

Hello, i have been reading through the info on this site re issues with this boiler, the one my friend has is six years old and will run the central heating but will not deliver any hot water to the house at all. i have read a post on this problem that points to a diverter valve that might...

Hello can anyone please help with getting my washer going again. the serial number is WFO2867GB. the machine has run well but now will not go into spin mode. i have checked the pump impellor , it did have a coin in it which has been removed, the pump now works but still no spin mode. could i...

Hello, thanks for this info but i checked the pump impellor and it spins freely, the fault you describe actually happened on my machine. cheers stuart

Hello, i have just been to a friends house and their dishwasher has just decided not to function the model is an excel SGS46E18GB/73, from what i can see the machine is not filling with water, when asked to start a progamme i can hear various clicks inside which i presume are elctrical...

hello just thought i better pass on the beloved dishwasher is running well again, i could not find a fault with it, there was no water in the base , i triggered the float switch a few times, rebuilt it all and after a false start it is ok, i still think the PCB will give up the goast in the near...

hello, i have now taken the dishwasher out, i dont think there is any water in the base, i tipped it backwards and coulnt see any coming out cheers stuart

hello, i would appreaciate some more help from people who know about these machines. my last post for this dishwasher described the problem of the pump constantly running even with the door open. the outlet wasnt blocked as i tipped some more water into the pump well and it pumped it straight...

hello to all, our 8 year old dishwasher has thrown up its first problem which is good going for all the use it has had. for some reason its appears to be stuck in run the pump mode. i have taken out the outlet pipe from its holder and blown back down it there is no blockage, the pump will...

hello again, the flue is a low level square device, looking at it the exhaust pipe in the flue cannopy sticks much futher out than the fresh air intake pipe. i haven't had time to actually strip the flue system down yet but my iinitial thoughts are that due to its design there ddoesnt appear to...

hello, the flue is a low level balanced type, the oftec engineer has just left and he ha never come across the flue causing this problem. the burner runs really well without the flex pipe on that draws the fresh air in. inside the pipe it has traces of black deposits suggesting that at some time...

hello gain, the boiler now runs but when the flexable pipe is connected it starts to cut in and out, the flue is good with no obstructions, any thoughts? cheers stu

hello, to the best of my knowledge the burner did not light, it trip out straight away, i am not sure about the electrodes or the oil valve opening, can i place my hand on the burner to feel the click of the oil valve during start up? cheers stu

hello, i am in the tricky position of having lost the services of the local boiler engineer at present. my grant boiler trips out after a second or two. having downloaded a manual after advice from this site a couple of things might not be right , the gap between the electrodes is 4.5mm and...

hello, can anyone please point me to a left hand feed shower please, i would like a 10.5 kw if possible. cheers Stuart

hello i am having problems with these valves, is it possible to buy the motors that actuate them without having to buy the complete valve? cheers Stuart

hello, can anyone please point me to getting hold of a service manual for this boiler? cheers stu

hello, i need a wiring diagram for this programmer, does anyone know were i can get one from? if the programmer is defective as it now doesnt appear to be instrsucting the boiler to turn on and of can i fit an updated programmer to the exisiting wiring? cheers for all advice stu