Search results

https://www.amazon.co.uk/Triton-Tank-fed-Pumped-Electric-Shower/dp/B00URN8KWU

yes it is quite common

I would say yes I have done in the past. I assume your soil pipe is vented

I would put the red sleeved black in the white and the two blacks in the blue

I would also check your expansion vessel the big red thing in the boiler will have tyre cap on it open up press slightly if air comes out ok if water could be loosing water from pressure relief valve outside is there a 15mm pipe outside dripping

Yeah thought of that after i posted couldn't be capacitor if oil pressure constant I took the air box apart it was clean fan was clean and as i said before ran with snorkel on and off. I was wondering if the soot could have been giving me false readings as it was burning off I am...

Its a Camary 5 90A with a riello RDB burner pump pressure was 8.0 bar the boiler has been running fine for 3 years or so without service and oil was delivered in september I think i am going to try a new capacitor

Yes

Positive they had the manual

Its a balanced flue and i did brush it also i tried it with and without snorkel

Hello ALL I was called out to a oil combi boiler black smoking first thing i think is great going to get covered in soot, well i cleaned it all up changed nozzle fired it up and started my analyzing the Co2 was going too high opened up air settings all the way still going above 13%...

sorry but you guys are a bunch of diy nots i don't think anyone of you are an electrician if you were you would now what i awas talking about

sorry but we are 17 th edition now and are you saying that a socket ring main should not be rcd protected!!!!

I am trying to give best advice to wiggles rather than your useles comment and knowledge!!

rf lighting is high on something all circuits in new build or rewire according to 17th edition are must have dual rcd boards with rcbo smoke alarm all sockets must be rcd protected fact from 15th edition to 17 th any electrician who says different is dangerous.

[b]Wiggles makes me laugh all the help you get here bunch of diy nots i am electrictian 23 years kitchen socket ring should be rcd whatever . these All boards now a days are dual rcds were all circuits are rcd protected so rf lighting you would rather a radial to a ring main ????? if so you...

if you have electric hob don't wire that with 4mm

HAHAHA ColJack odviously you are no electrician!! As for 64 amp capacity most domestic house dwelling are only 60 amp supplied. Most houses are wired with 2.5mm socket ring mains with upstairs downstairs or kitchen and house. Also all sockets either radial or ring main should be on RCD as to...

Hello If your doing two radials i would join them and make a ring main and put them in the board on the rcd side with 32 amp breaker marked kitchen. I wouldnt put a 4mm cable radial on 32 amp breaker i would use 20 amp.

Hello all Just got back from an oil boiler serviced 2 weeks ago customer complained burning sooty went back changed nozzle did another analysis 12% co2 the sooty exhaust gone but the only thing that concerns me is the flue exhaust temp got up to 400 C is this the soot burning off ? The manual...