Search results

I tried loads of lubricant but just can't get either of the screws to budge. What are my options now? Thanks

I have an Aqualisa shower and the pump motor appears to have stopped working. I took the cover off the box and the fan wasn't spinning. If you tap the box to the right it starts spinning but only slowly. Are these repairable or am I looking at a whole new processor? Thanks

Hi I wan't to paint some wooden bedside cabinets using Dulux Heritage Eggshell paint (water based) Can somebody recommend what type of roller I should use and recommend a brand to get the smoothest finish. And some tips on how to achieve it too would be good Thanks

Yes. It sits tight in the screw Was looking for additional advice as to what you do when they won't budge. What's best to lubricate?

I do but I can't get them to budge

I have a Belling DB4 cooker. The left (main) oven element has blown. I want to replace it but the two screws that hold the element in place are seized. I don't want to try too hard in case I mangle the screw heads What's the best way to remove these screws? Also can the element be replaced from...

On my model, the display is always blank unless you open the door and it always shows the set temperature and not the actual temperature UNLESS it's just been plugged in or switched off and on again then it will display the actual temperature when you open the door. It will do this for a few...

I'm on my second one of these Samsung Bespoke RL38A776ASR/EU Classic Fridge Freezer with SpaceMax™ Technology after the first one failed after 6 months. Both fridge and freezer stopped cooling. Engineer diagnosed a faulty motherboard, replaced it but it made no difference and gave up. Samsung...

I don't want to attempt it in case of disaster. I'd rather just be able to put some kind of sealant round it if that's possible.

I have a very slow leak from a joint in the pipe that come out of my heating oil tank Money's tight so I'm looking for a temporary solution to fix it until my next boiler service. Is the a product I can apply that will solve this? See attached photo. Thanks

I've bought some Zinsser Perma-White Anti Mould Paint which I want to paint skirtings with. I've done a test run and it's not turned out well. Lots of bristle / brush marks. I used a Prodec brush. Can I have some advice please on getting a smoother finish. Techniques etc. I'd rather stick with...

I need to replace a flat garage roof that currently has felt on it. Money is tight so I'm looking to trim costs if possible The area measures 2.8m by 5m I'm in South East England (Kent) There's no access issues etc getting on the roof and the rafters and boarding underneath are all sound. I...

I'm trying to mount my 55" TV with a bracket over my fireplace. The original brick chimney breast has been covered with plasterboard but there are no studs in the central section where the bracket needs to be secured. The plasterboard is 30mm thick with a cavity behind and then brickwork. I was...

I'm trying to mount my 55" TV with a bracket over my fireplace. The original brick chimney breast has been covered with plasterboard but there are no studs in the central section where the bracket needs to be secured. The plasterboard is 30mm thick with a cavity behind and then brickwork. I was...

Looks like the pin has worn away the sleeve in this hinge and the door has moved so I'm looking to replace it Does anyone know what type / brand of hinge this is and where I could purchase it? Thanks

Will they work if I’m replacing the halogens bulbs with LEDs If not, what do I need to do? Thanks

Hi Can someone confirm if I can replace the original Tamlite transformer with the Knightsbridge one. Do I need to replace the other box (what's that called?) too? Thanks

Will it be straightforward to replace this unit (and other matching ones) with ones that have easily replaceable bulbs or are they wired differently? Thanks

How do I remove it for replacement if it’s an integrated unit And why would anyone design something like that? Thanks

Hi How do I change this type of down light bulb please Had the clip type in my old house so not familiar Thank You