Search results

Thanks for your advice! if its the same quality as the normal RF2 you get from the sky box im ok with that :D The box you linked to above has now been replaced by this: http://www.satcure.co.uk/accs/Triax_Unilink.htm What i dont understand is what the two rotary switches are on the side...

Thanks for your replies!! I hadnt even seen that box before (probabaly not looking hard enough). Although im not looking for high quality picture, i would like it to be at least simlar to the original RF2 coax style picture you normally get out of the back of the Sky box. so think i might...

Ok, so this is a strange situation. I have a second tv (in bedroom) wired up by RF2 output on back on my Sky box via a coaxial cable/magic eye etc in the normal way. My problem is the coaxial input on the back of my samsung TV is damaged inside (very poor signal) i have tested this by plugging...

Do you know if you can purchase and fit just the relay? Assuming that was the problem. Or would it mean new pcb time... :shock:

I have a Zanussi ZDC67550W condenser dryer and it has been stopping through a cycle for no reason. The drum judders round allot before it comes it comes to a stop and a clicking sound can be heard coming from the electric board area behind the control panel?? I have basic knowledge of appliances...

Hi all, help required please... I recently laid around 40 Buff riven concrete slabs (yellow ish colour) on a cement base, when i woke up the following day and looked out my window at my recent work i was shocked to see light cement stains over some of the slabs (i was careful of not getting...

Hi, wondering if someone can help me please. I have canceled my sky contract that was running 4 tv's around my house and purchased a freesat box. I have screwed on the main connections from the dish to my freesat box and it working fine on my lounge tv. However before I had 2 Coaxil wires...

Hi, I hope some of you clever guys can help. I have a TV connected to my sky+ box in my living room. I want to put the TV in the garden to watch the worldcup :lol: what is the easiest way to extend the tv out to the garden as i cannot move the sky+ box, can i connect it via a standard...

Hi, Sorry for yet another garage conversion questions, i have done a search but found nothing to my circumstances. i live in a semi detached house with a brick garage attached to the side, i plan to knock a doorway through the living room into the garage and section off half (maybe a little...

Hi Guys (and girls..) We have a en suite with a shower pump fiited (slalmada CT50) connected to cylinder via side entry essex flange (i love that name... :wink: ) we are installing a new pump for a shower in main bathroom. Can we run both off the hot water cylinder with no changes (teeing...

Hi All, I am hoping that you clever bunch might be able to help me out... I have a problem regarding my hot water cylinder, when the hot tap is turned on there is a horrid creaking noise coming from what sounds to be inside the cylinder. It only makes the noise at first when the hot tap...

The potterton thermostat was a PRT100 and the main programer (for CH and HW) is a Potterton EP2000 Any help would be great.. :D

My current room stat was a potterton model and was not working/taty so i decided to chage it, i purchased a honeywell T6360 stat when i removed the potterton stat it had wires going to the following points.. point 1- red wire point 2- yellow wire point 3- blue wire So i thought it would...

thanks guys for you fast replys-much appreciated :D Yes i intend to purchase a new programer and clip on the base plate but am not going to get one until next week, so want to by pass. So if i connect the L and the 3 i should get the HW to fire UP? Thanks!

Hi people, I have a broken (burnet out-long story) Potterton EP2000 CH/HW programer. I have taken off the control pannel to reveal the base plate, does anyone know how i can bypass the control to get the HW to fire up by connecting two of the terminals together..? if so whitch ones..? On...