Search results

Thank You I will look in the morning making sure that none of the wiring is touching metal. I will also make sure that rubber grommets are all in the right place. I will start around the brake and clutch pedals as I have a feeling that area could be a common place wiring could touch metal.

I have a Renault Modus 1.5dci. The 10a fuse which controls the interior lights keeps blowing (This fuse is also for the electric mirrors and also the cruise control). I have disconnected all of these things and connected them all back up 1 by 1 and it works for a day and then blows. Because...

I have a Ideal Heat Only Boiler (installed 1989). open vented system well maintained hot water works but heating doesn't. This happened once before and it turned out to be a relay in timer. Can you please give me a few hints about what it could be. Thank You

33 People have looked at my post but it seems to be a difficult one as nobody has replied. I thought I would give a few details. Potterton Boiler Now I do know that my gran moans about her heating timer. She says that it clicks loudly whilst on. I presume there is a relay fault or...

Also, can powerflushing machines be hired? I can only reply to the bottom bit. Yes Powerflush machines can be hired. HSS do them I think it will be about £60 tops.

Hello I have just replaced my Grans room Thermostat. It works fine apart from the fact that it keeps clicking every 10 seconds or so. Sometimes the clicking is even more regular. I am thinking about taking the stat back to the shop but I first want to make sure it is not just me. I have...

I am not saying that you are definetley wrong but in my experience I have found the immersion to be cheaper. For example this time last year my combined gas and electric was £120. Since I have been using the immersion heater my gas and electric is now £45 per month and has been since August. I...

Fused spur? I am not sure but I do know that there is a immersion heater. Number of wires coming from boiler = 3. I have just opened up the small box at the base of my boiler with the boiler thermostat on.

I was just saying that as I use my immersion heater to heat ALL hot water so I don't want to have a combi and lose my cylinder.

Ideal Classic rs40 (I think this was put in when the house was built - about 21 years old) Upstairs there is the cylinder, pump, cylinder thermostat and small junction box. The main power supply I think is in the kitchen with the boiler as this is where the fuse switch is. Also the...

I have been told that when my boiler is changed that a new cable will need to be run from the pump (based upstairs in the airing cupboard) to the boiler. I imagine that this means carpet coming up, floor boards coming up. As I am not fixed on one brand of boiler I thought that to save that...

Please could somebody explain the purpose of the pump overun wire.

Please can you tell me which Good boilers do not require a live feed between the boiler and the pump. I only know of one so far which is the Glowworm flexicom. By the way it will be a 15w or a 18w. Thank You Paul

Thanks to both of you. My boiler is only 2 meters from my meter. I do have a gas hob but still feel that 15mm will be fine. This EcoTEC 415 should be drawing a fraction of any combi.

I have a 21 year old Ideal Classic rs40. I am just about to replace this boiler with a regular heat only boiler as I use my emersion heater on economy 7 (£45 combined gas and electricity fuel bill per month). I currently have a 15mm gas pipe from my meter to my boiler. Because of this I...