Search results

Update. Speaking to building control and a hetas installer about this installation. You do have to fit an extractor to external when fitting a new kitchen and building control know about it the way round it is to fit a drimiser system. Other ways are to fit a extractor to external but...

I won't be using the extractor fan as the food we cook doesn't smell but BC require an extractor to be fitted above the hob even though we don't want one. The additional ventilation is for the log burner as it will be over 5kw but I will be ducting it to the back of the woodburner or very...

//www.diynot.com/forums/viewtopic.php?t=222500 Found this from google but it is nearly two years old. They now have made carbon monoxide alarms compulsory since then so this would alarm the user if the extractor effected the flue pull on certain days.

I just need some advice on clearing my situation up. Im in the process of doing a rear extension and making downstairs all open plan (but leaving the hall with the stair case in for fire route), so it will be lounge, dining room and kitchen. The room will be 45 sq m of floor space. The wood...

That sounds like it possible that it can be worked around v's replaced the whole soil stack. My main fear was having to run a new soil stack and having to repipe my just finished bathroom. Thanks everyone :D

I dont know about the footing been correct yet as ive only just started digging, to find the mass of pipework. I have been digging to the spec given by my architect then seen as i found clay so soon i was confident that 750mm would be deep enough (hit clay about 200mm down)

Just notice its got gravity hw, has it always been like this or is the "fault" something that just happened?

From what you say, the ch valve doesnt sound like its fully opening on demand so therefore not making the end swtich and firing the boiler. Could be a head swap or maybe head and body depends on make.

Thats fine and i have done that, BC application only just gone in as planning just passed last couple of days. The main concern was that i would have to fit a new external soil stack because i would have to re-run all my internal waste pipes to it. Creating more work and more cost. Is a...

Ive just seen your edit re permission. I thought this but a "mate" told me that yorkshire water has no changed the rules. If the drain is within you property then all repair costs are down to the house owner.

I was unaware that the drain would be there, on my drainage search it shows the main drain the street, the i knew it went down the side of the house (found it while digging). I also knew the kitchen outlet would be in the way but i assumed it would be the only one, so i could just cut it back...

There is a big difference between cheap and £250 per hour. I feel you have read my comments wrong, if redherring feels the same way then i will rewrite it. Ive not contacted him, as i assumed it would be more of a building issue than an architects.

Already got an architect and he doesnt charge that hourly rate, feel sorry for you if you pay that amount!!! I also help people on this forum (as i do on many other forums) for free and give my time, what valid point does that have here. There is nothing in my post showing disrespect for...

I took from your reply that the first post was too bad for you to understand, so i have editted to the basic question, to which you asked for. Is the exisitng connection from your soil stack to the drain run a simple 45° junction? Yes, the angles on the first diagram are how the pipes...

Some drawings (not the best but you might get the idea)

What do you do about drainage pipes that are in the 750mm footings i have dug? I know that any pipe below that can be built over with bridges to support the concreate above .

Is say 45 mins but depends if pumped hw or gravity. Have to checked the hw stat to see what its set at? Also have you checked the boiler stat? If its gravity hw it will have an impact on hw temp.

Steve radiators can rust from the inside this is the case when chemicals have not been added to water when any work done. Id love to see a picture of a radiator fitted upside down. When you get the rad swapped for a towel rail make sure they add inhibitor in.

I agree render that lot, get rid of them glass block on the front (glass or brick up) then paint it white. Would be ok for me then. Round back i wouldnt worry about that extension its only the roof that makes it look poo imo. Throw a load of fish in that pool as they will get more use out...

If the expansion tank cant cope with the expansion the pressure will rise above 3 bar, safety valve will open, extra water will come out of prv, system will cool down then have no pressure left in it. Filter could be in return valve as i said. Air in boiler would cause the same fault as...