Search results

Many thanks all, apologies for the late reply as I'm just back from holiday. I took lostinthelight's idea in the end (easiest for me) and grabbed a ox of 50 of these http://www.screwfix.com/p/timbascrew-flange-timber-screws-gold-6-7-x-100mm-50-pack/3374j did the trick nicely

Hi After some guru help please. I've designed and made the following deck and frame as below but I'm stuck as how to now attach the top battens going towards the house on. Ideally I don't want to strap over as I have UPVC roofing going on and the snap in metal bits run along each of these...

Thanks, and the tape is really thin I guess so it wont show as big stripes down the wall. I had a really bad experience last time as I purchased a self adhesive square holed tape that stuck out a mile. Looks like I'm off to B&Q!

Many thanks As I only have about 5m of joints to fix the big bag of filler looks excessive, would normal filler work or is this a must? Thanks Neil

Hi I've just partitioned a room with studwork and plasterboard which I've fixed with the proper screws but I'm after some guru knowledge on the best way to proceed with what I want next. I now need to fill the gaps and cover the screw heads, is it best to use filler or caulk to do this...

We are having to tip in into the pre wash tray on the final rinse, if we add it to draw 3 (the softener one) it is taken as soon as the program starts. The water never enters draw 3 again during the entire wash and spin

Hi I have an Indesit WIXL123 that has started taking the softener from tray 1 (the pre wash/bleach draw) Any ideas what could be the cause / possible fix? Thanks Neil

superb tips and comments, I'll kick it until I bin it! Thanks Neil

Hi I have a fairly old Karcher 411A pressure washer that seems to work fine for a while but then the compressor runs constantly and builds up the pressure more and more. The only way to stop it is to press the trigger on the hose to release the water. Once you let go it just keeps...