Search results

Hi, I have a a Traymate shower tray installed in my bathroom which seems to have started leaking. It has been installed for just under 5 years now but I have noticed a brown line on the ceiling underneath in my garage which would appear to be directly under the horizontal shower tray drain exit...

@chirpychippy @CBW Job done! Overall pretty happy. The panel is snug at the back wall and floor bottom back to about 2/3 along where at the front a small gap starts due to the floor being slightly out. Have cut a packer and placed underneath to hold it solid. Will mastic along the bottom too...

Thanks guys, so far so good. There is a wooden beam at the back also supporting the worktop but have put a post in also to be double sure. Skirting sanded and filled - final fill and sand required.

Hi, I’m replacing an MDF kitchen end panel which has blown due to a leaking washing machine. There appears to be silicone in-between the top of the original panel and the silestone worktop. Is this just general clear silicone or is there a specific brand/type I need to purchase? Thanks in...

Hi, I’m replacing an MDF kitchen end panel which has blown due to a leaking washing machine. There appears to be silicone in-between the top of the original panel and the silestone worktop. Is this just general clear silicone or is there a specific brand/type I need to purchase? Thanks in...

Hi - I have a Conceala 2 cistern which keeps making a very faint high pitched noise after flushing, as if a tiny amount of water is continuing to fill the tank. I can access the cistern through the hole for the push button plate or if essential lift the shelf top above for access breaking the...

Apologies for the delay, please see pic attached.

Hi all, I had a new bathroom installed 3 years ago including an attic ceiling fan being installed At the time the installers warned me that I could potentially have issues with condensation running down the pipe. Over the time I have which has led me entering the attic to empty water collected...

This is the only part of the circuit I can access as the connecting box to the transformers is under the decking as per original post. The live is the original lighter brown and switched lives are darker one to transformer 1, the other to transformer 2?

Part arrived today but unfortunately hasn’t resolved the problem. The smart switch also fails to automatically calibrate with the capacitor on the circuit. Looks like I will need to find a different smart switch or revert to traditional method.

Understood. Great. Will let you know how I get on. Chris

i can order sleeve for them. Which size sleeve… 2/3/4mm? Cheers Chris

Was going to cut them so they terminated flush in a connector each?

Many thanks Bernard. One ordered today. Quick question, can I cut the length of the metal connectors to suit? Thanks, Chris

Many thanks Bernard. One ordered today. Quick question, can I cut the length of the metal connectors to suit? Thanks, Chris

Many thanks Bernard. One ordered today. Quick question, can I cut the length of the metal connectors to suit? Thanks, Chris

Thanks - don’t forget I can’t get to the transformer as under decking so will need to be located at the switch.

Looks good. Could I install it above my pattress box in the wall cavity?

Potentially though they are not keen to support as switch is being used with a transformer.

Hi all, Last summer I re-did my decking and installed new outside garden lights using 2 existing garden circuits the builders had previously installed. They installed the switch for these lights in my lounge (1 live, 2 switched only using 3 core cable). The new lights are Techmar 12V LEDs Up...