Search results

  1. H

    Boiler and Radiator Sizing

    I am having my bungalow's gas boiler replaced and am considering replacing my radiators as well. The radiators are probably original 1975 vintage, steel panels with no fins, mostly singles but some doubles as well. According to...
  2. H

    Dual Immersion Indirect Vented Cylinder

    Can anyone recommend an indirect, vented, twin immersion cylinder (if such a thing exists) ? I want to heat my water via Solar PV (and an Immersun), the idea being to heat the top of the cylinder via one immersion heater and if there's enough spare electricity left to then heat the bottom of...
  3. H

    Need help identifying and replacing a fitting

    Thanks for that (and everyone else's advice), but I already have the pump and instructions, which suggests using a side tapping. It's interesting that Aqualisa prefer teeing off the vent pipe, but I'll leave that debate for another thread.
  4. Untitled

    Untitled

  5. H

    Need help identifying and replacing a fitting

    Do you think that my tank has some sort of integral threaded boss, or is it likely that if I undid this fitting there might be some sort of nut inside the tank that might fall off and I wouldn't be able to reconnect it ?
  6. H

    Need help identifying and replacing a fitting

    So would I want one of these (http://www.wickes.co.uk/compression-male-iron-straight-coupler/invt/420227) if I really can re-use this outlet ? Compression Male Iron Straight Coupler Product Code: 420227 Size: 22mm x 0.75in
  7. Untitled

    Untitled

  8. H

    Need help identifying and replacing a fitting

    Ok, here's a sketch I made with what I think the connections are doing. I can't take a picture because I've tied all the lagging back on the tank now.
  9. Untitled

    Untitled

  10. H

    Need help identifying and replacing a fitting

    Yes, I've read the instructions (Stuart Turner Monsoon). They suggest a side fitting, the existing fitting will be redundant because it already feeds the bath/shower, but the pipe heads in the wrong direction for the pump inlet so I just want a straight outlet from the tank. I'm simply going...
  11. H

    Need help identifying and replacing a fitting

    I'm pretty sure it's hot water, it's just below the seam at the top of the tank.
  12. H

    Need help identifying and replacing a fitting

    Can someone help, please ? I'm gathering bits that I need to add a shower pump that will be sited in my airing cupboard. The pump will be sat on the floor next to the tank. At the moment there is already a side-tapping with an elbow fitting (shown in picture). This has a 22mm pipe...
  13. Untitled

    Untitled

  14. Pump Project

    Pump Project

Back
Top