Search results

Hello I have had a 5 foot 80 watt flourescent fitting in the kitchen for ages. Its time to chang to led strip so what length of led will give me about the same equivalent light. Warm white . Thanks thyristor44 Solved now thanks for all the help and advice.

Hello I am slating an outhouse with slates, 10 x 18 thin blue slates. The span of the building is 3m to the outside. It is very low but is used for access to a garage so headroom is at a premium. I have some 4" x 4" spars I want to use but the question is how far apart should they be. I intend...

Hello I am adding another rad to my system. It goes 22mm to very near the point but I wondered if I could use 10mm for the last meter or so as I need to drill through a 2 foot stone wall and 10mm is definately easier. Thanks thyristor44

Hello I am going to dryline a cold wall with 100mm of foam then plasterboard and wondered if I need to leave a gap and if I need a membrane and what sort. Thanks thyristor44

Hello I have a Grant Vortex Pro kitchen utility 16kw oil boiler and would like to know which port the oil inlet should be connected to. The diagram shows an inlet port and a return port. The system uses only one pipe but the oil inlet seems to be connected to the return port and the suction...

Hello Can anyone help me with an s-plan diagram using sunvic szm1801 mo mo valves. I have s-plans for spring return valves v4043h but cant find one for mo mo and there seems to be some difference. I have a conversion chart for replacing sm type actuator with szm but cant find an s-plan for sm...

Hello How can I cheaply fit a room stat (no wireless or programed) in a bathroom where all is in zone 1. I dont want to use a rad valve as the radiator is used as a dump for the rest of the system and it can be used on its own. Any ideas. Thanks thyristor44

Hello The vaporizing burner Rayburn is getting too expensive to run so its time to be drastic. The Rayburn does the cooking and a gravity fed towel rail in the bathroom and some hot water. We have a bottled gas hob and a fan oven and off peak water and storage heaters. Some of the problems...

Hello I have a slate roof that I am wanting to re slate. Its a lean to and was a hay loft that I re slated about 35 years ago but is beginning to leak. Its formed from 9x3" timbers ( rafters? ) I live in an exposed site and would like to sark straight on to the 9x3s with 15mm osb, counter...

Hello I have a slate roof that I am wanting to re slate. Its a lean to and was a hay loft that I re slated about 35 years ago but is beginning to leak. Its formed from 9x3" timbers ( rafters? ) I live in an exposed site and would like to sark straight on to the 9x3s with 15mm osb, counter...