Search results

  1. J

    Potterton Performa 30HE boiler flashing 60 degree light

    Sometimes it will run OK and then it will just have the constant flashing 60 degree light. A couple of weeks ago I noticed that the hot water was running ok from the tap in the kitchen near the boiler but upstairs when running the hot water tap is was not triggering the boiler to run now matter...
  2. J

    Potterton Performa 30HE boiler flashing 60 degree light

    Ok thanks, the gauge does move as I put the pressure up slightly and the needle moved ok.
  3. J

    Potterton Performa 30HE boiler flashing 60 degree light

    Thanks for the reply, how would I check the sensor and where is it located? Thanks
  4. J

    Potterton Performa 30HE boiler flashing 60 degree light

    Hi, i hope someone can help. I have a Potterton Performa 30HE boiler and it is getting a flashing 60degree light which suggests it is a pressure problem but the pressure gauge shows between 1 and 1.5 bar. I have checked various forums and a common fault that comes up is a faulty pressure sensor...
  5. J

    Consumer unit for shed/summerhouse

    I am going to get someone to do the work for me I just wanted to get all the parts I needed in advance..Thks
  6. J

    Consumer unit for shed/summerhouse

    Hi, the shed already has electricity in it through an old consumer unit(in the shed), this shed has the tumble dryer, socket for chest freezer and a light in it, this is fed from a consumer unit in the house (I cannot remember the mcb rating at the minute in the house). I want to replace the...
  7. J

    Consumer unit for shed/summerhouse

    Hi, I am looking for some advice. I will be building a summerhouse in a couple of months and want to run electricity to it, I currently have a shed with electricity but I need to change the consumer unit and wanted to see what would be the best size to buy as I want to start buying things now...
  8. J

    Base for a summerhouse

    Hi, I am just looking for some advice. I am looking to buy a new summerhouse in the next couple of months which will be around 4m x 3m and was wondering what the most cost-effective product was for the base and also if it would be concrete how much materials would I need? Thanks
  9. J

    Sealing around a bath

    Hi, I am trying to find out how to seal around a bath that has already got a plastic bath seal. My problem is the bath seal has now deteriorated (gaps underneath) and is fastened in behind tiles. I have tried using silicone sealant around the seal but it still leaks. Is there anything else I...
  10. J

    Oversize letterbox help

    Sorry forgot to mention it would need to be chrome or silver.. Thks
  11. J

    Oversize letterbox help

    Hi, I am trying to find a letterbox draught excluder for our letterbox, unfortunately the problem is it is oversize. The aperture size is 212mm x 78mm and the normal size is not high enough :(. Is anyone able to point me in the right direction ? Thanks
  12. J

    Smart Thermostats

    Hi, I am looking to upgrade my wireless thermostat to one of the modern 'smart' thermostats so that I have more control over the heating. I have been looking at various makes and they all seem to have good points and bad points. I have looked at Nest, Salus IT500, Hive and Tado. Has anyone...
  13. J

    Floor Tile Sealant

    Can anyone recommend a tile sealant that I can use on the floor in the kitchen (to seal the grout and tiles).
  14. J

    Removing old grout

    hi , some of the tiles are lifting and I have pulled them up and then I will dig the old grout out of the other tiles and put fresh in so it is all the same
  15. J

    Removing old grout

    no its not a big kitchen, but do not want to put lino down really
  16. J

    Removing old grout

    The problem I have is that the dog is getting a bit old now and occasionally she has used the kitchen floor as a toilet and it has seeped through the existing grout, I am just looking for the best way of sealing against it :?
  17. J

    Removing old grout

    Hi I am having to lift some of our floor tiles as the grout I had used wasn't very waterproof (even though it said it was). First question is can any one recommend a good tool for removing grout (I only need a cheap one as I only have about 10 tiles to lift) and also what would people recommend...
  18. J

    Letter Plate for front door

    Hi, the aperture is 210mm wide x 80mm high, not sure of the thickness of the door
  19. J

    Letter Plate for front door

    Hi sorry I forgot to mention that I am looking for a brass letter plate
  20. J

    Letter Plate for front door

    Hi, I have been trying to find a new letter plate for our front door to try and cut out all the draughts . The size of the hole is 210 x 80mm, can anyone point me in the right direction please :?:
Back
Top