Search results

Thank you bernardgreen. The 47k resistor will be used with a surface magnetic contact and all this will be connected to the aux input of a wirelless magnetic contact (MC-302E PG2). This MC-302E obtains power from an on-board 3 V Lithium battery (Low Battery Threshold 2.2 V). I don't know if...

I don't think that i really need a magnetic contact for the internal door but i want to know if something like this could be done. Propably i'll install the MC-302E PG2 with one surface magnetic contact to the exterior door and if i can i'll put a 4.7k resistor (how many Watts shoud be ? ) for...

Thank you very much SimonH2. So if i undesrtand correctly the following will happen. Operation of two doors In series wiring 1st Door Closed - Magnetic contact CLOSED - NO ALARM 2st Door Closed - Magnetic contact CLOSED - NO ALARM No need for resistor In series wiring 1st/2nd Door...

Hello, i would like to use two magnetic contacts connected to the auxilliary input and i want to operate them seperataly.I don't know if this is possible. Thank you for your interest.

Hello, i want to connect two N.C magnetic contacts using parallel wiring in the auxilliary input of the Visonic MC-302E PG2?. From the manual of the MC-302E PG2: a.If the auxiliary input of the MCT-302E PG2 is defined as a Normally Closed (N.C.) type, series connected N.C. sensor contacts...

Thank you again very much , i'll do just that.

Thank you very much.Just wondering my home's main fuse box has already fuses of 10A (except 2 of 16A for kithen) so every socket comes protected by this 10A fuse. I think that i'll just put a 3 amp fuse on the cable and then a plug and from that i suppose that i can connect to every socket in...

Hello again! if i want the PowerMaster 10 panel to be easily moveable/hidden around the house can i use just a plug to connect to AC POWER? or i have to use an unswiched spur. If i use a plug should i install on the cable a fuse or it is not necessary. Thank you very much.

Hello, is there any way that a PGM output (Vmax=30V,Imax=100mAh) can trigger a second alarm panel (same or different) in a different (but nearby) house? I am thinking that this is the best way for two houses a bit far from town but one next to another. What things should be considered? Any...

Hello again, so if i understand correctly the MC-302E PG2 could be installed upside down or in another way. I have some doors that open to the left and i think this is the only way or i have to install it in the wall and from the auxilliary input connect some surface magnetic contacts or just...

I'll buy a Visonic PowerMaster10/30. Just trying to figure out how i can connect the two auxiliary inputs of the Visonic MC-302E PG2 with an OPTEX BX-80NR (same battery operated both) in the first case and second connect the same type transmitter to a KNIGHT YEND21 magnetic contact with 4...

How can I connect two alarm inputs with a detector or magnetic contact using 47ΚΩ resistor for E.O.L wiring? The detector has TAMPER (NC,COM,NO) and ALARM (NC,COM,NO) and the magnetic contact 4 inputs (2 TAMPER and 2 ALARM) Thank you very much.

Hello , i think i found an outdoor detector. It's the OPTEX BX -80NR . So i am wondering if the MC-302E PG2 could be installed inside the BX-80NR. I think that the size would not be a problem. I want this kind of detection in my balkony (12x2,4)m instead of the 90 degrees cover pattern of the...

Thanks guys a lot i ll find a detector and i ll ask you again. Take care

Thanks very much CD I'll look for it. If it is 12V do i need to do something else or there is no problem. Thanks again.

Hello , i would like to buy some MC-302E PG2 door/window contacts. In fact i was thinking that i could use some wire and connect Τhe auxiliary input with a outdoor sensor but i don't know if this could be done. Has anyone tried this ? What specifications should i look for to buy a sensor...

Hello, i wan t to buy a PowerMaster 10 kit from England and install it without delay in Greece. I would like also to buy (after a few months) an outdoor detector the new TOWER 20AM PG2 and maybe for internal installation the also new TOWER 30 AM PG2 and the SD 304 PG2. So here are my questions...