Search results

  1. P

    How to finish and seal around bath which previously leaked

    I'm looking for advice on how to finish this bath. There was water on the ceiling below the bath, and having removed a trim seal, I have found that the tiles don't even meet the edge of the bath! I'm not sure about putting on another trim seal. I was thinking about maybe adding a...
  2. Untitled

    Untitled

  3. Untitled

    Untitled

  4. Bath

    Bath

  5. P

    Connecting cistern to pan

    Yes that's it! Bolt, plastic washer and a plastic nut. You get what you pay for I guess.
  6. P

    Connecting cistern to pan

    Thanks for the reply. I just sit the flush valve nut on the do-nut then, and it will pull down. It really seems like it will not fit, but I will give it a go!! The ribs on the flush valve nut seem like they will deform the do-nut. The nuts are through the cistern into the pan. No...
  7. P

    Connecting cistern to pan

    Hi, I have a problem connecting a cistern to the pan. The 'doughnut' supplied when installed the way the manufacturer suggests (sitting it on the pan) seems to raise the cistern from the pan by around 15mm, which does not look right. However if you connect this doughnut to the...
  8. P

    Electric Fire Wiring

    We have a new 2000W electric fire with 1mm 3 core and 13A plug on end. The flex is not long enough to reach the FCU for the fire. Bought an additional 1m of 3 core 1mm flex to connect to the FCU, but what should I do to connect them? I was thinking a trailing socket, and just plug it in? Or...
  9. P

    Wiring 8 LV downlight transformers

    At 64p each, I'm not worried about the cost. I just thought that there may be a faster way to do it. Such as connecting 2 - 4 transformers to one junction box, is this bad practice?
  10. P

    Wiring 8 LV downlight transformers

    So if I use 8 J201 junction boxes I will only use 2 terminals in each one. I was thinking that there must be a more effecient way.
  11. P

    Wiring 8 LV downlight transformers

    I have 8 12v 50w downlights, and 8 60va transformers. I would love some advice on the correct, most efficient method to connect them to the mains. There is a 20A 4 term junction box connected to the lighting ring, and I have switched live connection with a 1.5mm T&E tail (at present). So...
  12. P

    Consumer Unit for Extension & Shed

    Hi, Hoping that somebody will be able to offer me a solution to a small problem. We have an extension attached to our house, and the electrics/decorating in it had been DIY'ed by the previous owner. We have owned the property for six months and moved in a month ago. Most of the property...
Back
Top