Search results

Thanks for the reply, The water doesn't seem to get any hotter if I throttle the rap back, seems to be doing the same hot(ish) / luke warm cycle whatever the pressure of water coming out of the tape. Just taken the cover off the boiler, I can see that the flame on the burner is increasing...

Hi, My CH seems to be working fine (rads piping hot), but the direct hot water has definitely gotten cooler over the last few weeks, and now is it fluctuating between reasonably hot and luke warm while the tap is running. Its got to the point were we can't fill a washing up bowl with...

I tested the aps by simply blowing/sucking on the inlet and heard it click. How would I test it with a multi meter? Thanks Haydn

A quick update. Had a thorough look at everything. The boiler doesn't fire up for CH or hot water. The pump and fan come on when either CH or hot water are demanded. The pressure switch seems to be fine too. There is definitely gas to the boiler. As far as I can tell there is no gas being...

Hi, I have a Chaffonteaux & Maury Britony combi which isn't firing up. The pump comes on but I get no ignition. Is there anything obvious I can check. There is gas to the house (the cooker works) and the boiler has been serviced annually. I has been working today as the rads are still...

Hi, wondering if anyone can give me some advice. My Britony combi 80 boiler makes a groaning sound every 20 to 30 seconds when the shower is running (sounds like an aeroplane flying over). Its fine with the CH running and it doesn't happen when I turn a hot tap on, just when the shower is on...

Hi, Wondering if anyone can help me with a problem on my Hoover H130M washing machine. It only runs for about 5 minutes at the start of each programme and then doesn't move on (i've tried it on all the programmes and its exactly the same). I can turn the dial to a rinse cycle and it will...

Thanks for the info. Changed the PCB but has made no difference. The ignition spark is still nice and strong but no pilot. I took the cover off the solenoids, everything looks in virtually new condition (not that means there isn't a problem). Theres continuity in all the wires but no sign...

Hi, The pilot (and hence main burners) on my Fuelsaver 55F are not lighting. The ignition is sparking away but no gas it would appear. I've put a voltmeter across the terminal to the solenoid valves, with the ignition sparking, and I'm reading about 0.6 of a volt!! Does anyone know if this...

Hi, I have a problem with the Switchmaster in my system (blue one with white dial etc). I have a Danfoss CP715 control panel, when the hot water is turned on the switchmaster turns to the correct position and the pump runs, but nothing happens when the central heating is turned on (ie the...