Search results

Its a ring circuit

Thats what i hoped you could do. What about connecting them to the existing wiring.

Hi i have a double socket but i want a switched fused spur. Is there anyway to have a single socket and a switched fused spur in the same double socket pattress box.

Thanks but i don't need 100m that makes it very expensive. Even if i ran two seperate cables i would have to throw between 30m and 40m away.

Hi i need to buy a satellite cable for a 30m to 35m run. Not sure if i will have a single cable or twin cable. I have read about WF100 cable but i have seen so many types of cable for sale. Can anyone help please.

Ok thanks for the help EFL

Thanks so is the fused connection unit in the garden room or house. They are smart led lights so probably not having a switch. So what about the fused connection for the sockets.

Hi want to run power to my garden room and an electrician has said i need a small consumer unit in the garden room which would be fed from a fused spur in my house is this right. It will be running between 4 and 6 13amp sockets and 3 Led light fittings too. A 1.5kw 13amp portable heater will be...

Thanks for that crank39 i have now odered some.

Hi could anybody tell me what type of silicon i should put on my UPVC cill before fixing the frame to it please.

No answers needed now.

Thanks to all got the new blades and fitted going in the right direction.

Thats what i thought turn it over so arrow and teeth point the same way as my existing one.

This is my existing blade which goes anti clockwise with teeth entering from below wood. The Saxton blades are the ones i was looking at but the pictures show teeth and arrow the opposite way so do i turn blade round so teeth enter fro below wood.

Hi i have a circular saw that takes 185mm dia blades with a 20mm bore. I am looking for a new blade i have found the size i need but the pictures show the arrows and teeth going in the opposite direction. So do i just turn the blades over when i fit them to my saw or will that not work.

Hello i need to run a new kitchen ring main which is on a 32 amp MCB. Is 2.5mm twin and earth cable the correct size as it will be running through wall mounted plastic trunking and not under the floorboards as the existing one is. It will be connected to the consumer unit by a qualified...

Not sure what to do now. The walls in the kitchen are plasterboard so would the cables just drop down from upstairs.I might investigate under the floorboards more but dont know where to start looking where if anywhere there would be a break or junction box. If i was to run the cables myself that...

Do you think where the cables have been crushed between the brick and floorboard that the cable could have been damaged causing the problem i have. Also the electrician i had round wants to run a kitchen ring main from the consumer unit along the garage floor through the back of the downstairs...

its probably been like that since the house was built

I have taken up the floorboards on my landing where there was a lump in the floor. The lump was caused by cables on to of the downstairs brickwork with a bit of wood on top of the cables and then the floorboards on top of that effectively squashing the cable between the wood and brick work so...