Search results

Hi folks Has Texecom changed the Bell hold-off button on the latest firmware version for the 64w? I went into Bell Test and pressed 'omit' but nothing happened - so I tried the No (X) button and the keypad said Bell Disabled. If so how does one come out of the Bell Disabled without triggering...

Hi Secureiam, I would use it as a backup of my site(s) configurations.. Plus its only Pounds 7 (sorry I have a USA keyboard, no Pounds sign) a year. One more thing you might be able to help me out with: I have Texecom Connect App on my phone and it's working, at last as I had version 1.x...

Hi Secureiam, Thanks for all your help and advice, you've been most helpful. I now have my SmartCom and 64W panel up to the latest firmware without much fuss and trouble. Now I'm all up to date what should I know about the new firmware that is a good feature to know about? I have signed up...

Hi Guys, I have managed to upgrade my SmartCom to 04-03-01 Now i'm trying to upgrade the 64W and get this warning:- _____________ You have selected to upgrade the firmware on the Premier Elite panel which requires confirmation from the site. Outputs relating to signalling and connected...

Hi guys, I reset the SamrtCom today and it's all connecting to my network 2.5Gb I now need to update the Firmware in both the 64W and SmartCom. I have a Cloud Account with Texecom and have logged in. I have managed to find the Upgrade Firmware Page for the 64W but I'm not sure what file to...

Hi guys, I reset the SamrtCom today and it's all connecting to my network 2.5Gb I now need to update the Firmware in both the 64W and SmartCom. I have a Cloud Account with Texecom and have logged in. I have managed to find the Upgrade Firmware Page for the 64W but I'm not sure what file to...

Thanks, guys for the advice: I remember some years back when one needed to update the firmware in the SamrtCom to stop it from going out of date and bricking. My SmartCom was updated to help stop this.. Thanks for the MAC addresses, the one starting in 00-0B-6C comes back as:- Devices with MAC...

Two questions: 1, What MAC address does Texecom use? Can't find Texecom on the MAC address look-up site. 2, If I start to deploy Z-Wave devices will it interfere or, perhaps, help the Texecom Ricochet communicate with the panel via more hops? Regards, Bob...

Is there any way I can reset the power to the Smatcom to have it connect to a new Draytek Mesh? I have a Draytek 2927ax router with three AP906's Mesh nodes. The SSID's are the same as before and so is the Password. I have 40+ nodes/devices on the same network and a Drayrek 2927 can handle up...

opps should read: Is there anyway I can test the system by triggering one of the detectors without sounding off the sound box alarm so I can now test to see if I CAN reset the area from the keyboard? Read more: https://www.diynot.com/diy/threads/texecom-area-reset-problems.510691/#ixzz5UBfvdtb0

Hi Secureiam, Thanks so much for your help - I opened a new account in Wintex and printed out the settings and compared them with my own setting and found quite a few differences (Area, User and Global settings). I have now set my system to what Wintex uses as its standard set apart from a few...

BTW: my wife got up before me this morning and was making breakfast when I heard what I thought was the Alarm system box beeping!!! OMG I thought what has she done - so I dashed down from the bathroom to try and stop the sounder box from going off only to find it was the dustbin lorry reversing...

answers and questions inline (Firstly what was the error you couldn’t reset.) It said 'Area needs resetting' then indicated Area 'A' - I only have one area set up. (Secondly look at a default profile and re program the options that way.) How can I get a 'default profile'? I started with...

Thank you...

Ah! so one wires up a button to the control box then press it on the way out to speed-up the arming - yes?

Is it one of the keyboard buttons?

Premier Elite 64... Tested my alarm yesterday before putting up the alarm sounder box up on the wall and had trouble resting the Area A after the test - had to go into Wintex to reset the area. Tried Engineers and User codes but the keyboard seemed to be stuck in telling me I need to reset...

Does anyone know what an 'Exit Terminator’ button is? Ref: Installation Manual INS176-15 Premier Elite Series Area Arming modes. 2 - Exit Term. The suite will arm after the ‘Entry/Exit’ door has been closed, the ‘Exit Terminator’ button has been pressed and the ‘Exit Settle’ timer has...

Ah! got it, i'll give that a try too

Will that has stopped the controller from beeping but the keypad still make a few beeps - but much better now TKS