Search results

Hi all, just took over a 2nd unit at work which has 5x 32amp 3ph sockets on the back wall which will be our workshop. I think 3x are 4mm cable (3c+n+e) and two are 2.5mm. I don't need any 3ph power but do need 20 and 32amp single phase power. Is it OK to make up a lead with some 4mm / 6mm flex...

Hi all, As above, we're in a mid terrace with attached garage and plan to knock a hole in the wall between hall and garage to fit an internal door. The wall is double skinned with a cavity between, and door will be opening INTO the garage. The total depth of wall including cavity is 240mm so...

I've got a coffee machine that requires a new olive I believe as it won't seal when tightened up. I was wondering if anyone knew where I could get hold of these fittings so I could attempt to replace it. Alternatively if anyone has any tips on how I could get this to seal that would be great...

So got an inline extractor fan in the loft. 3 pole isolator fed from a ceiling rose (line loop N + E). Orange light on isolator comes on and cables to fan are live, but fan doesn't run. All the JB's in the loft are in old metal conduit, and all black + red wires. The bathroom and a couple of...

Hi all, I'll be fitting an inline fan in the loft this weekend and bought a condensation trap for the ducting. It's too big for the ducting to pull over it, but if the ducting slips inside it then I can't see how to secure the ducting to it other than tape. If I use a straight coupler it's...

This is one of four bathroom downlighters: Should I terminate the cpc in a wago connector or similar? I didn't install these, already in the house when we moved in. Thanks Michael

Hey all, Looking at installing an inline extractor for the bathroom in the loft above as got plenty of access up there. Couple of questions: 1. There's an old aluminium flu up there from an old boiler, it goes directly up and out the top of the roof. Would I be OK connecting the extractor to...