Search results

  1. A

    Crack in sealant

    I did...filled bath and waited 24 hours. Do you mean I need to remove ALL of it from the bath and start again?
  2. A

    Crack in sealant

    Hi all Just resealed bath and found a little cracking has appeared. Silicone has dried. What is the best way to fix this? Is it okay to add another layer of silicone on top? I've attached some photos if they help.
  3. A

    Whirlpool Generation 2000+ fuse replacement

    Yes ! Thank you so much for your help.
  4. A

    Whirlpool Generation 2000+ fuse replacement

    Yes they are. The bulb that blew isn't but the other one is and the fan is working okay. I suspect I need to get a replacement bulb.
  5. A

    Whirlpool Generation 2000+ fuse replacement

    The 'Stop' has gone away and time is now showing after pressing the middle button on oven and setting the time.
  6. A

    Whirlpool Generation 2000+ fuse replacement

    I found the main fuse box which had a switch for cooker and it was tripped. Having flipped it up the oven is working now. Perfect.
  7. A

    Whirlpool Generation 2000+ fuse replacement

    That was the problem! Thank you so much. It's working again but the digital display which usually has the time now says 'Stop'. Hmmmmm
  8. A

    Whirlpool Generation 2000+ fuse replacement

    This is an image of the oven. The hood is separate from the oven.
  9. A

    Whirlpool Generation 2000+ fuse replacement

    Yes the hood is separate. Where would I find the main fuse board / consumer unit? Would it be near the oven?
  10. A

    Whirlpool Generation 2000+ fuse replacement

    Attached is an image of the oven switch on wall. The socket on the wall it isn't working either. I plugged in a lamp and it didn't work.
  11. A

    Whirlpool Generation 2000+ fuse replacement

    It has seemed to affect the oven too as it is not working either.
  12. A

    Whirlpool Generation 2000+ fuse replacement

    Hi all, my whirlpool 2000+ needs a fuse replacement. I turned on the light switch on the hood and there was a pop and the bulb blew. This has stopped the oven from working and the digital time display is not showing anything. I suspect the fuse has blown. The oven was there when I bought the...
  13. A

    Re-seal bath with 1 cm gap

    Before I saw the later replies I turned one of the bottoms anti clockwise but it didn't make a difference.....the bath didn't move up (or down). I guess I needed to adjust the top one. Will give that a go.
  14. A

    Re-seal bath with 1 cm gap

    Do you mean I should take off the top nut and put some washers on and then put the top nut back and tighten?
  15. A

    Re-seal bath with 1 cm gap

    What does 'semi captive' mean? I'm a complete beginner when it comes to diy.
  16. A

    Re-seal bath with 1 cm gap

    Thanks you. What do you mean 'adjust all corners accordingly'. Do you mean by the same amount?
  17. A

    Re-seal bath with 1 cm gap

    Thanks. I will take a look.
  18. A

    Re-seal bath with 1 cm gap

    Are these the nuts you mean?
  19. A

    Re-seal bath with 1 cm gap

    I don't feel comfortable lifting the bath as I'm not sure how to reach the feet as the bath is already in place. Is there any particular expanding foam I should use? Are there waterproof ones?
  20. A

    Re-seal bath with 1 cm gap

    Hope this helps. Thank you.
Back
Top