Search results

  1. butako123

    What's a good flow rate for a bathroom basin?

    thanks Munroast. Don't have much time as the bathroom work has already started. What is the "normal" for bathroom taps? Surely there must be some industry guidelines or regs about what is good/bad flow rate?
  2. butako123

    What's a good flow rate for a bathroom basin?

    Were having our upstairs bathroom replaced. Our system is gravity fed pressure from tank in the loft. It seems to be a trend that modern monobloc single lever taps seem to have quite low flow rates, to save water. My wife likes a Hansgrohe tap which is rated at 4 l/min at 0.2 bar. Which sounds...
  3. butako123

    Low Pressure Kitchen Mixer Tap ?

    My partner is persistent in desiring a single lever mixer tap. What do you think of a Pump? Something like a Salamander iBoost pump installed under the sink on the hot feed. Is that a really bad idea?
  4. butako123

    Low Pressure Kitchen Mixer Tap ?

    Thanks. So, if it's not possible to install a single-lever mixer tap with only 0.5bar on the hot side, what are our options for boosting the water pressure? I don't want to go through the huge cost of converting our whole house hot water system to main pressure. Are there any small (super quiet)...
  5. butako123

    Low Pressure Kitchen Mixer Tap ?

    My wife wants a better tap in the kitchen, one with a single lever mixer, but everything I have read say that we need more hot water pressure. My house has gravity fed hot water (tanks in loft) and I measure 0.5 bar at the kitchen tap. Mains cold water is about 3 bar at the same tap. Is it...
  6. butako123

    Texecom Connect App does not Disarm internal sounders

    It works perfectly. You are a genius. Thank you.
  7. butako123

    Texecom Connect App does not Disarm internal sounders

    I was testing it by arming from the app and then triggering one of the internal PIR's. No opening doors. Anyway, thank you @secureiam I have changed the panel output type to "Bell SAB". I have not tested it yet, as the wife would not be happy with the alarm going off at late hours, however...
  8. butako123

    Texecom Connect App does not Disarm internal sounders

    Sorry I don't see that in the menu. Is it a different Group Type ? Can you point me towards the right menu option please?
  9. butako123

    Texecom Connect App does not Disarm internal sounders

    The internal sounders are Kinetic Soundbombs, hard wired, each on the panel output pins. The outputs are configured as Group Type 'Area' and output function 'Alarm', below is a screenshot. The sounders will trigger when the alarm triggers and stop when I disarm from the keypad, but not from...
  10. butako123

    Texecom Connect App does not Disarm internal sounders

    Hello, I have a Texecom Elite 64W with a Smartcom, I have internal sounders connected to the panel outputs. When the alarm is triggered and I attempt to disarm from the Connect App the external bell will stop but the internal sounders do not. The app says the system is "Disarmed" but the panel...
  11. butako123

    UFH extension, and existing Circulating Pump running?

    Hi folks, I have an extension in which there is fitted underfloor heating, connected to it's own pump & manifold and room thermostat. The old part of the house has regular radiator heating and hot water tank with it's own circulating pump and thermostats. I have noticed that the circulating pump...
Back
Top