Search results

Hi my daughter had a leak under bathroom sink which is took a look at. Just wondered why there would be two flex leads from each tap ? ( see pictures ) thanks .

Morning everyone - looking for the best screw options to attach a mdf kitchen door to a plywood ( 18mm) carcass using a Blum hinge - thanks

Hi all , trying to turn water on for washing machine ( new old house ) and this is the water pipe - it has no lever just a small screw . How do I turn water on ? Thanks

Evening , My son had his ideal classic boiler serviced - I noticed it was high pressure at rest approx 3bar and expected it to be resolved after service it isn’t . The guy only commented that there was small leak which he fixed . Please see attached report and notice no pressure comment in there...

Evening , My son had his ideal classic boiler serviced - I noticed it was high pressure at rest approx 3bar and expected it to be resolved after service it isn’t . The guy only commented that there was small leak which he fixed . Please see attached report and notice no pressure comment in...

Evening , periodically a fuse related to downstairs sockets trips . I checked all sockets to find one indicating an open neutral using a socket tester . Will this cause the trippping ( there is never anything plugged in) if so what is the fix ? Thanks

good morning . I am looking to remove the above alarm system , has anyone experience of this and the procedure ? Thanks for any advice

Both valves in new property are open on filling loop and pressure high in boiler . Turned the one off on left hand side off ( will release some Water via bleeding ) other one seems very stiff . Am I right both should be off ( ie horizontal ) . What is consequence off right hand one being open...

Hi I needed to address a leaky flex pipe coming into toilet by replacing it . The picture shows the existing one , I expected an isolation valve but have one with an additional piece of copper pipe ? Can I just not get a longer length of flexible pipe and go straight into isolation valve ? Thanks

Morning everyone . As you can see my photo I have some ugly surface mounted sockets and trunking . There will be plaster and black mortar underneath - I was going to tackle by hand to minimise the dust ( the room is empty) . Appreciate your advice on undertaking this job . Thanks

I have a new old house and discovered leaking towel rail valves ( after a day in house ) . I was going to isolate it to resolve leaks but the valves are unfamiliar to me the cross heads turn in both direction but cannot seem to identify a normal lock shield nut to switch off any help would be...