Search results

Thanks for all the help guys. Think this is gonna be the best (without breaking wall). Just triple checking that the stub of the Tee with the access plug is ok? Won't start collecting rubbish there right? (Circled in red)

Being stupid. Forgot to wrap the black rubber washer around pipe first

Might be a silly question but I just assumed you connect a 32mm pipe to this end of the p trap? But can't work out how to secure it? (It's a mcalpine asa10 1quarter inch)

Another option is this bizarre layout

Hi guys, if using a 90elbow at the top, I could make it work but would need to have a small stubby section of 32mm pipe. Is this ok? (Highlighted on red). It'll only be solvent on one so at least removing it from compression would be ok

Thanks for the help guys. Bought a load of different parts and just tried the T and sweeps. Don't think I can make it work (note in the photo, that's without any straight pipes joining the joints)

But the pipe coming out of the wall is horizontal? The dead end could collect if directly connected to it? Hence why I suggested it would be an elbow then the T?

Can't find any elbows with a cleaning eye. Guess I would need an elbow connected to the pipe in the wall, then a t above it. As putting a t directly onto the pipe in the wall seems like a potential of having stuff stuck at the cleaning eye end?

Will try and do that. Will try a swept at the bottom of I can

This one ok?

What sorcery is this?! Sounds like a useful to have round the house anyway

Ok, thanks. That sounds logical. What's meths? Like 99% isopropyl? Also turps?

Will have a look and start crossing my fingers Thanks for your help

@Scally-Ho it does mention it's anodised in the specification section. Any recommendations of paint stripper to use?

Its coated aluminium This one...

Hi, Stupidly splashed white paint on metal tile trim and only realised when I smudged it. Any tips on getting rid of this without affecting the black trim? (Paint is zinesser mould resistant paint)

Hi all, Looking at buying an L-shaped bath double hinged screen. Just wondered if anyone has any experience or thoughts on these? My main worry is that it looks like the only point of support is at the wall. But the hinge section where there's most 'swing' force doesn't seem to be supported...

Hi guys, I was going to tile to the side of the bath panel but as the panel is a snug fit (box at the end of the bath and is a corner bath), I was thinking it may be hard to remove the panel if I do so. What do people normally do? Just silicone the side of the bath and paint the wall there?

Great idea. Would you silicone the side edges to prevent water going behind?

So no need to silicone the edge? I would have thought that would be wise considering it a vanity unit for sinks?