Search results

Good morning, I came to see a Kenwood cooker CK 232 DFA, the main oven not working at all even the neon indicator not coming ON, the timer looks OK and is on the manual, the selector switch is OK, any chance of a circuit diagram to trace the supply. The cooker details: Type: CUMV Model...

A glow worm betacom 28 works fine on CH but it doesn't on DHW, no flashing lights showing, would it be the valve motor?

Thanks every one, the problem was the gas meter which wasn't giving enough gas, so it was an Inadequate gas supply.

Hi, well my worcester greenstar condensing Ri system boiler try to fire but it doesn't start, and after so many times it stops and the blue light start flashing, some times ago I noticed when the boiler was working the cooker burner goes low and when the boiler stops the cooker comes up, any...

Hi, Main 24 HE combi does not fire when DHW on demand, pushrod does not move, replace the diaphragm and still the same, any ideas please.

replace the PCB and it is OK now.

[/url] Thanks CBF for the information, I have seen the fault finding chart but it does not show any voltage test around the diverter valve, I believe is the PCB but I just wanted to be sure of that, any other component out side the PCB might cause the diverter valve relay to fail or what.

Yes the demand light comes on the pump runs the burner lights on but the no DHW at the tap, no 240V at the actuator.

Hi, I think you are talking about an other boiler, the diverter valve is motorist valve there is no diaphragm or micro switch, my post was very clear no 240V at the motor when DHW is on but the boiler fire OK the rads get hot and no hot water

the above boiler runs OK on CH, on DHW it dos fire and keep working but no DHW, after checking the Diverter valve found is not working and more test found no 240V at the diverter valve, is it the PCB?

I can see that, but no harm done may be in the future if some one need that will get in touch

if you still need the information send me you email and I will email the instruction to you, [email protected]

Hi every one, a greenstar 28i junior works Ok on CH but does nothing on DHW no fault indicated by the blue light. any idea?

thanks gas112 it is working fine now, spot on.

Hi, the heating comes on even when the selector switch on DHW only even when the hot water tap is off, any help please.

Hi every one, I came to see this dishwasher as it doesn't heat the water, I had the service manual from caple and I tested all the components and parts that to do with the heating side and found every thing OK, the strange thing there is no alarm for that fault as indicated in the manual, any...

yes the pump and filter OK

Hi, I came to see an indesit moon washing machine which is not working correctly, as it goes through a washing cycle it doesn't empty the water, I tried to empty it by pressing the on/off for few seconds but the light doesn't flash and the pump doesn't start, any one had such a problem with this...

Hi, I came a cross the shower mixer "Sceptre" any idea what is this mixer? it looks like mira but can't say that for driftnet, it is not shutting the water off completely so it needs some washers but I need the make, thanks

thanks for your reply, if you go to http://www.worldproducts.com/pdfs/WPIISF.pdf you will see he circuit for that suppressor filter and the inputs should have 0,68M ohm but I,m getting about 10 ohms only so is shorting the mains and I think it is faulty, check that please and let me know