Search results

Thanks for the replies. I intend to have 2 gate motors - each is 60w. What size SWA cable would you recommend? Also, what type of cable for the infrared diodes, intercom etc? Thanks

Hi, I have recently purchased a set of electric gate motors (underground type) and wish run a power supply to them. What type/spec of cable should I buy? The distance from the consumer unit in my house is no more than 10meters away. Also, how would the cable need to be layed? Concreted into...

Ok so i'm going to take up the slabs and then hardcore and concrete. People have mentioned that i could just screed onto the hardcore and DPC. Would this work? Or would it be too weak and possibly crack at a later date? Olly

Thanks for the reply, Once the slabs are up I recon the depth will be around 6inches. If i have to hardcore it - how deep should i go?

Hi there, I'm lifting up some original stone floor slabs in my houses hall, they did also have a screed and tiles on top of them but i lifted those a few weeks ago. My intension is to lay a victorian style tiled floor in their place. Please see picture: What do i need to do to the...

Floor

Yes 15mm of screed all over would work. I'm thinking about removing the Slabs though now as I believe they are worth rather a lot on money.

Hi, cheers for the reply. The floor has some visible subsidence which looks like it occurred a long time ago - the house is 200 years old. I think i might have to add a damproof layer and some insolation to be on the safe side. If i do remove the stone flags it will be earth underneath...

Hi there, Background: My house hallway is being renovated. I have removed a layer of original victorian tiles (unfortunately heavily damaged) and now revealed the original Yorkshire Stone slabs - see image. //media.diynot.com/40000_39785_64107_45841523_thumb.jpg I intend to lay a...

Hello, I'm re doing my ground floor hallway and would like some advise on floor preparation before I lay some replica Victorian Floor tiles. I've just removed a load of old floor tiles and the old concrete base (it was it bad condition) and reached my homes original Yorkshire stone...

This is the cartridge from the mixer unit: Replaceable? Second hand as i couldn't afford a new one.

Yeah i know its not the best thing to do, but is it possible to fix it? What do you think is wrong with it?

Evening everyone and happy new year, I have recently bought a second hand shower mixer unit (pictured). When connected the unit leaks from the water outlet (as if it where going to the shower head but not connected). Its as if you can't fully turn off the water via the on/off lever...

Turns out that you need to make sure the random stop cock behind the dishwaher and under the floor (i now know this is the Central Heating drain...) is fully turned off. British Gas lady came over, fitted a new PRV yesterday and a man closed the tap today. Result. Thanks for everyones...