Search results

Many thanks to all for info

There is afew different danfoss models which do you recommend

Which is the best Thermostatic Radiator Valve to fit,wax or liquid control and any make in particular?.

Has anyone experienced problems with gas pressure fluctuation with a hunter classic gas stove heater ?.

Tony,sorry for not phrasing the sentence correctly,looks like its going to be a regular cleaning job.

TONY Thanks for reply but not sure what you mean by the diaphragm not following the diverter,is it just a matter of cleaning out the diverter on a regular basis.

Last year the radiators warmed up when hot water was run,a new diaphragm was fitted but no improvement,ended up removing the divertor valve and cleaning the black deposit off the surfaces,flushed the system with cleaner and added inhibiter and all worked fine.Didnt use rad's much through summer...

has anyone experienced problems with pop up wastes supplied with b&q bathroom suites ie the bush gradually working its way from the plastic housing causing water to leak from the joint.

date on pcb is 1996 . PC011-2 ,No info on other parts of the panel

i have tried all these suggestions many times and had no response from the panel,looks like its a bin job,many thanks for the replies.

fuses all ok.have tried all methods of powering up,i do have the engineers code still no response.

the standby battery failed,alarm system powered down as per manual instructions,when new battery fitted all the leds illuminate and no response from the panel buttons.Texecom suggested only power up using the mains supply but this did not cure the problem.Does anyone know how to restore the NVM...

rads warm up when dhw drawn, replaced diaphragm, spindle operates ok and activates micro switch. can you strip divertor valve down easily as some unions have no threaded coupling only a hex grub screw are these servicable joints or factory joints is the back end of valve at fault or another...