Search results

One of the hob regulators needs to be replaced but I can't remove the glass faceplate which I need to do to gain access to the regulator fixing screws. Can anyone please help ? :(

My bathroom measures 8'x5'. The ceiling has been covered with plastic panels. Four 240v downlighters have been fitted into the ceiling whch is obviously against the regs, but wherever the lights are fitted in a bathroom this small must be against the regs. My question is: if I change the...

I had a survey done with a view to having my combi boiler replaced when the question earth bonding came up. The surveyor informed me that the pipes going into the unit would have to be bonded. I have read a recent post by johnD that there is no reg. that says this must be done and I fully...

have lost cd-rom and software quick start guide for my digital camera any advice on where to obtain replacements would be greatly appreciated as i need to install on new pc. :?:

The guy never came back to me. Must have been a load of c--p Best wishes SD

Hi there my drayton 711 timeswitch loses it's memory when power to c.h boiler is switched off. From what I understand from the instruction leaflet it should have battery back up for this eventuality. I have opened the unit up but can't find any sign of a battery or even where a battery may have...

wood, cable or whatever. they do not prove there is nothing 'dangerous' to be aware of.[/quote Correct. Mine bleeped wherever I tested on dry lined walls. I guess the panels must be foil backed. :x

I have the same doubts as yourself WMS This fellow reckons that the idea came from Canada. He tells me that he's been over there on a course with the manufacturers. Anyway he's going to give me a Quote for this treatment, and one for replacement units. I'll most likely go for the latter if...

Thanks for your reply petit pablo. Being an intermittent fault it sometimes doesn't fail,but when it does, it can happen after a few minutes usually when c/h and d/hw are running at the same time. I presume that I would have to drain the boiler to check the pump, or is it possible to isolate...

Thanks for that, but I had rather hoped that someone could advise me on what the fault might be. anyone? :(

Hi diane1 Thanks for the prompt response. Will keep you posted. SD :lol:

Ive just had a guy round and he says that demisting can be done by a process whereby they drill small holes in outside glass diagonally opposite each other then pumping chemicals into the cavity. The holes are then plugged and are hardly noticeable. the job is gauranteed for 20 years. Has...

I am having kettling and tripping out on overheat problems usually when using c/h and d/h/w at the same time. {intermittant fault) The boiler is now 13 yrs old and the problem first ocurred at the beginning of 2006. I got the B/W engineer out and he renewed the w/w heat exchanger and the...

Existing cu is a six way wylex with rewireable fuses fed by 16 mm tails. A 10 kw shower is to be fitted in bathroom for the present, but in view of the fact that a future extension to the house is planned we thought it wise to replace the wylex with a ten way unit to include an 80 amp rcd. The...