Search results

yes that's the one,there is a choice of 25/40/65 amp,I will do as you say and get what you sugest,thanks

thanks for theinfo,the ones I looked at at screwfix are large objects with an orange wheel tipe control at the front to switch the supply on and off,are these for the same application which in my case is to be able to switch off the supply from the incoming main fuse to the meter.

I have contacted my supplier re fitting of isolator,they said no charge involved and put me onto my DNO,they said not their responsibility buy one and contact supplier to fit the tails after installation,anyway I would like to know which to buy,I am assuming 65amp is this correct,regardsKeith.

thank you very much

Thank you lectrician,by the way parden my ignorance but what is DNO.

Thank you .

by the way,can you recomend a brand of timer that 3 seperate storage heater curcuits can be connected to

Thnk you for your help I will get a spark in and fit a time clock,but I will contact powergen they may fix it for free ha ha .

what I have is a wylex fuse box, it has the old fashioned fuse system bluee white red etc which are wired fuses,the circuits for the storage heaters are 30 amp and are runing of the buzz bar just like the ring main,cooker,lights etc,sorry no pictures at the moment only moved in two weeks ago and...

Thanks for your reply,having read about the teleswitch on this forum it would seem that when the off peak kicks in my whole house goes on to e7,when the off peak kicks out the whole house goes back onto daytime tarrif but the storage system should be off,this lends me to assume that apart from...

Hi, they are storage heaters but they have been switched off at the spur on the wall and I decided to check that they worked.I switched on the spur so they would activate at night and storeup heat,but the neon light on the on off switch at the front of the heater lit up and heat started to come...

Hi,I have economy 7 run by a dual meter and a teleswitch,I believe the teleswitch should activate the heater circuits and switch them off at the end of the cheap period.I notice that when the cheap period ends my heaters are still working on the daytime tarrif and there is no other form of time...

thaks for the info,regards Keith.

Yes and Yes,I am simply trying to avoid installing an additional consumer box and henly block,in reply to the statement that the box I have now is only suitable for 30 amp,I assumed if my cooker runs from it then a shower should also run,as regards why I am asking these questions it's a forum...

Yes I mean MCB,I have seen a gadget at my DIY store which is a MCB type thing and it looks like it is plugged into the fuse board in place of the spare fuse,does this sound right.

Hello again, my fuse box is the older type which has the type of fuses that one has to replace the fuse wire in when it blows,you know the ones with red or white or blue dots on.I have a spare one so can I fit on of the modern type RCD's that plug into the existing fuse location and connect my...

thank you all

just wondered if I got an electrician who is allowed to certify the work he does,will I still need to get an isolator or can he break the seals.

Thank you for your valued advice,

Hello everyone,my first try at this,I have read about how to install a new electric shower,can you tell me when I get to the point where I connect the exixting consumer box and a new one for the shower using a Henly block,am I allowed to remove the wire loops that seal the meter in order to...