Search results

Hi, hoping someone can advise please. when I switch the oven on, the display comes on but before I can select a program, it shuts off and starts beeping. The clock also resets to 12.00. I think one of the elements is not working well but has been like that for month. Thinking it might be PCB but...

Hi, I am installing a bathroom for a customer and they have a solid stone bath. The base has a small void that allows it to be lowered onto battens and access is OK to connect waste. My issue is that i pre-plumbed in solvent weld and expected to connect up to the tee with supplied waste...

Hi, looking for some advice please. I am wanting to combine the sink and bath waste in a refit i am doing due to lack of room under floor and too many holes in joists! My 32mm sink waste comes down from the far side of the bathroom approximately 1900mm then i propose for it to enter the rear...

Hi everyone, i am looking to make a wooden sensory board (or busy board) for my 1 year old grandson. I will be putting all the usual stuff on it like latches, handle, circuit breaker, light switch, bell etc. I am wondering what material i should use for the actual board? Would ply be ok and if...

Hi, thanks for reply. I have 6 doors and 1 window so overboarding is a no no! I have sent pics of worst areas to be fair, the majority is very fine cracking but stable. Tried sanding but wouldn’t do anything to cracking, just sanded whole area smooth if you know what I mean. I will continue to...

Hi everybody, new to forum. Not a plasterer but work in property maintenance and do the odd patch job but sometimes prepare ready for guy to skim when needed. I have a problem at home. I am trying to get hall, stairs and landing decorated and getting skimmed first. The walls were painted years...

Evening all! Can anybody please help? Prima LPR601. Green light (start) flashing continuously and not heating up. Suspect NTC or element but unsure how to decide which to purchase first! Also, 2 red lights are flashing alternatively to right of start button (unlike the Green leds, the Red...

Hi, I am fitting a 78 x 98 velux in a single storey extension. The tiles are 30mm thick flat ones. The building extends 4 metres out from the house. The height from the floor to the lowest point of roof (near gutter) is 2.7 metres. The height to the highest part (where flashing joins...

Am I missing something? The instruction, as I understand it anyway states that the recommended inlet pressure is 0.1bar. It then says if between 0.1bar & 0.01bar, priming may be needed. Does this not mean initially to get pump running without running dry? If that is the case then surely the...

Thanks for reply. Did not measure the water pressure as the mixer valve in main bathroom is fine. The vertical distance from bottom of cold tank to shower head is approx' 450mm but is this relevant as the unit is pumped? Gary.

Hi, Called to a job where the above was fitted (type 36022). Customer having to usually lower shower hose to get water flowing and temperature fluctuating (lack of hot). Unit mounted in loft. Cold feed from 15mm tank connector at side of unit. Hot feed taken from horizontal take off on...

Hi Pred, Thanks for responding. I have created a photo album with 2 pictures on but don't know why nobody can see them! Can you tell me? Thanks in advance, Gary.

Hi, can anybody please advise? We went to enlarge an internal opening. The wall is breeze and has what looks like a Birtley Supergalv beam in. It is 1050mm wide spanning a standard doorway. The plasterboard has been removed to give an idea of size of opening. To the right of the 1st picture...

Hi Rocks1, Yes, you were right! sorted that now but still a problem exists! Goes through washing drying cycles fine, but when finished, all clean and dry but eco light (no.3) flashing and sounds like pump or motor is still working! This stays like that till i power it off. Book says 'water...

Hi Rocks1, I bought a relay from RS today. I have soldered it on and tried dishwasher. I selected program and shut door. After a few seconds, there was a single beep. After about another 20 seconds, there was another single beep. As it didn't seem to be doing anything, i opened the door and...

Hi again, Thanks for your reply again! Not sure i understand what you mean :oops: If the door is opening (which it is as i ran it without front cover on and saw the solenoid actuate) then you say the heater is working. Does this mean that the heater is just not getting hot enough or the...

Hi, Just realised that the round black thing is the buzzer! The black square thing is the relay! Is this likely to be the culprit? With those resistance readings, is it a good idea to change heater as well or is this ok? Thanks, Gary.