Search results

  1. C

    makita 9401 4inch belt sander

    anyone know how to get the drive pulley off - I am trying to change the rear roller, but can't get past this stage? any thoughts REALLY appreciated!
  2. C

    scantronic 9448 replacing PIR?

    I have a 9448 installed roughly 15 years ago - recently one PIR has started to glow red continuously Can I simply replace the PIR with a new one (no obvious spiders etc infront of sensor) without opening the box? or is there likely to be another fault I do not have the service manual only the...
  3. C

    painting over synthaproof

    I have a understairs cupboard which has the walls painted with synthaproof + I'd like to paint over with a grey oil based floor paint. Is there a way of preparing the synthaproof/bitumen to stop it leaching through into the floor paint? would a coat of pva do or is there anything better...
  4. C

    shower stud walls

    I have 2 stud walls made of 18mm wbp ply for the new shower. It has been suggested to me that I coat the bottom edge/back of these stud walls with cementone SBR before fitting to the tray - I was planning to lay these bottom edges on a bead of silicone (between the tray and the ply). will the...
  5. C

    shower stud wall wbp

    I have 2 stud walls made of 18mm wbp ply for the new shower. It has been suggested to me that I coat the bottom edge/back of these stud walls with cementone SBR before fitting to the tray - I was planning to lay these bottom edges on a bead of silicone (between the tray and the ply). will the...
  6. C

    shower tray - mortar or silicone?

    any thoughts on which is better to bed a stone tray; I've only fitted them with mortar before, but was told it's now common practice to bed on silicone - if so, how does one do it?. is it a case of using ordinary silicone and covering the whole of the bottom of ther tray, or just at the corners...
  7. C

    aqualisa digital quartz concealed plumbing

    can any one help? I am putting in an aqualisa quartz with fixed head - 3 questions.... I have run 15mm copper from the pump to the recommended 1/2in bsp female fitting which is secured to the wall - do I need to wrap the spigot (used to mate up to the shower head) threads with PTFE tape to...
  8. C

    surrey flange

    can anyone tell me if the pictures posted here - http://marsden.fotopic.net/c1474921.html are of a surrey flange (suitable for a power shower in gravity system)? anyone any thoughts on the aqualisa digital quartz pumped shower?[/
Back
Top