clock

Hi, Looking for some advice, the clock in my oven has become very dim and the chime very quiet. A replacement clock unit (part number 5619490229) is £121, not cheap but can't really live without it (especially as oven no longer switches off when timer ends). AEG says it needs to be installed by...

Hi All, Hoping someone could help with this problem. Once I set the date and time on the Hive 2 thermostat, the display stays on that day/time (i.e. date/clock does not increment), meaning I can't set timers for central heating. For example, if I set the date/clock to 17/Oct/2023 09:20 in the...

Hi - does anyone by any chance have a photo of the wiring for a Rangemaster 110 front facia panel, particularly the indicator lights and thermostat area (cooker was bought in 2005)? We've had to replace ours today (fire damage) and I think looking at it the wiring isn't right. There should be...

Glowworm 30ci Combi. The mechanical heating timer clock became intermittent so I bought a replacement on-line. When fitted the replacement one, it did not work at all. I put the original back in and that now doesn't run either. Looking at the back of the clocks it shows the need for 1.2 - 1.6 v...

I have inherited a Wien Solid State Digital alarm clock; the digital type with flip numbers. I haven't dated it yet but I'm guessing it's from the era between the late 1960s and early 1970s. The unit works fine and is a pleasure to have. It also has a very loud alarm sound which is perfect for...

This unit is about 6 years old. Previously on a power failure, pressing the ON button would restart it with the correct clock time again, (probably dependent on the time without power}. Lately, after 3 hours without power, pressing the ON button causes the indication light to come on briefly...

Hi, I have inherited a rangemaster Toledo 110 gas. I was having issues with the clock. The buttons were all jammed in and bent up. So when the oven went into auto mode I was unable to return to manual and my gas ovens were locked off. After a few days the clock then just died. I've ordered a...

Hello. Have a recently installed Sundial RF Pack 3. Clock reverts periodically (4 times in last month) to default (2010) - seems to be random fault. This is third new controller - exactly same problem. System otherwise OK. Has anyone got same problem ?